News


Letter to the editor

September 2017 News

Dear Sir,

The combination of your editorial the ARC Advisory report and the Gavin Halse column in the July SAI&C, prompted this response.

The situation regarding current and future staffing is intriguing: even with a conventional, 4-20 mA plant, staffing is less than optimal at most of these. How do we know? Delegates at our various courses in topics related to control, often claim that their reason for attending is to ‘fill in some of the gaps’. By the end of almost any of these courses, it is obvious that the ‘gap’ is actually a ravine. Most maintenance staff seem to get by with a mixture of trial-and-error, and memory (last time the fault was X, let’s see if it’s the same again). Much of the problem seems to start at school level, and doesn’t improve from there.

Another part of the problem is that thinking is not taught, and many students appear to learn only how to pass exams, without the understanding that should be a part of their education. Another part is that mental arithmetic is no longer taught, with the result that most people reach for a calculator to convert between milli Amps and Amps (not to mention that they are not sure whether to multiply or divide). This lack often means that measurements are taken without knowing what the expected result should be, and therefore not knowing whether or not the measurement is correct. And this is just at the instrument maintenance level. Now compound this by bringing digital data communication into the mix, and then adding big data, plus Artificial Intelligence.

When it comes to loop control, chemical engineers often make the transition to this discipline quite effectively. This is probably aided by a better operations understanding than the equivalent instrumentation technician or engineer. However, there is a lot more to effective control than understanding the algorithms involved, and a part of this is understanding the interaction between the process and the instruments and, in particular, final control elements. Then there is the question of whose responsibility it is – shouldn’t it lie with the person responsible for instrumentation and control?

Along the same lines, who should take responsibility for the IT component? Here one could argue that the form the information capture should take (i.e. which is the most relevant and actionable information, and which form the action should take) should be a joint venture between the C&I practitioner, and the person most familiar with the process and how it can be improved. Obviously the lines are blurring here, and perhaps that is a good thing. Someone (I think it was Peter Senge in The Fifth Discipline) pointed out that the most fertile area for improvement is at the overlap, where ideas from different points of view, can interact effectively. So add process, C&I and IT together, and the possibilities for some creative improvement are multiplied. And this is just for continuous (usually chemical) processes.

Now add Industrie 4.0/IIoT into the mix. Unfortunately, politicians have heard this phrase, and obviously don’t appreciate what it implies. Comments like “Industrie 4.0 will save Africa” are being spouted, without realising the Industrie 4.0 sounds the death-knell for unskilled labour, and in Africa, including the RSA, the necessary skills are thin on the ground.

This ties in with what was spoken about above: that a rethink about education and training is urgently needed. Firstly, from the Grades up, people need to be encouraged to think and to argue, as a necessary first step to true learning and understanding. Secondly, they need to comprehend that understanding is underpinned by prior understanding, and that an exam doesn’t signal that a reset button can be pressed on what came before. Thirdly, and perhaps most importantly, it should be impressed on them that learning should become a lifelong habit, fed by curiosity. In our field, one of the givens is change. From an early age, children need to be reminded that education is preparing them for change, and that means ongoing individual and collective growth.

For one, it means that educators must be prepared for this themselves, and create in the learners an excitement and expectation around change and growth. For another, it means that employers must also embrace the expectation of change, and the possibilities for improvement that this brings (which also means that questioning of the status quo must be a given).

In conclusion, Prof Sylvan Blignaut of NMMU, in the 8 June edition of The Star, (talking about the failure of Curriculum 2005), states: “One of the reasons was a lack of alignment between the school curriculum and teacher education in universities and colleges. Another was a lack of capacity and support for teachers whose opinions and feelings about the curriculum were not taken into consideration.” It left many teachers feeling hopeless or inadequate. This can be extended to bosses during their career, who also need a shift in the way they accept questions.

This means that not only their teachers, but also their future mentors, need to have something of a mindshift. Mentors should include their supervisors, who also need to realise that they must be playing a role in improving plant performance, by getting the maximum from their charges.

Where do we start?

Eric Carter,

turboTRAIN



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reinstatement opportunity for ECSA registration
News
In 2023 the Engineering Council of South Africa (ECSA) announced a special opportunity for engineers in South Africa to reinstate their registration status if it had been cancelled. This exclusive offer is available until the end of August 2024.

Read more...
RS South Africa showcases industrial solutions at MTE Phalaborwa
News
RS South Africa recently showcased its latest industrial and electronic solutions at the Mining and Technical Exhibition in Phalaborwa in Limpopo.

Read more...
Specialised Exhibitions appoints Joshua Low as commercial director for Africa
News
Specialised Exhibitions has appointed Joshua Low as commercial director for Africa. This strategic addition to the leadership team comes as Specialised Exhibitions embarks on an ambitious phase of growth across the African continent.

Read more...
WearCheck earns Dissolved Gas Analysis accreditation
Wearcheck News
WearCheck is now accredited to perform Dissolved Gas Analysis for transformers, following a recent assessment by SANAS.

Read more...
From the editor's desk: Riding the hype cycle
Technews Publishing (SA Instrumentation & Control) News
The other day I came across an entertaining article on the ten biggest tech failures of the last decade. Google Glass, 3D TV and Elon Musk’s hyperloop have faded into obscurity. Others, like the metaverse, ...

Read more...
STEMulator – a gift to the youth of the nation
Editor's Choice News
STEMulator is a groundbreaking virtual platform designed to ignite the spark of curiosity in young minds and stimulate their interest in STEM subjects.

Read more...
A strategic milestone for Conical Technologies
Conical Technologies News
Conical Technologies has been appointed as the sole distributor in southern Africa for Mibbo, manufacturers of a vast array of products for the automation industry.

Read more...
Parker Hannifin brings advanced motion technologies to the World RX
Parker Hannifin - Sales Company South Africa News
Parker Hannifin is back on the FIA World Rallycross Championship grid to push the limits of sustainable performance in one of motorsport’s toughest arenas.

Read more...
Tapping into the laboratory economy
News
Africa’s fast-growing young population and enthusiastic adoption of digital technology could pave the way for the continent to fast-track science innovation and become a world leader in diagnostics, analysis and research. This is according to industry bodies, speakers and exhibitors at analytica Lab Africa, South Africa’s only trade fair for laboratory technology, analysis, biotechnology and diagnostics.

Read more...
Fuel your competitive edge with tech that transforms
News
The KwaZulu-Natal Industrial Technology Exhibition 2025, taking place from 22 to 24 July at the Durban Exhibition Centre, offers a vibrant, solution-focused platform tailored to the unique needs of KwaZulu-Natal’s industrial, manufacturing, engineering, maritime, agricultural and mining sectors.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved