Dimming detectors for warehouses
February 2012
Sensors & Transducers
Direct Dim from CP Electronics allows detectors to measure and control luminaire outputs in warehouse applications. When forklift trucks or warehouse personnel enter a defined zone, lighting can be switched on to the full operational level and be adjusted to a maintained illuminance level where required. When they leave that zone, the lighting output can be reduced over time to a minimum preset value, or turned off completely.
Often there is a health and safety requirement to keep the lighting at a minimum level so that if personnel or plant are not moving, possibly due to an accident, there should be enough light available to see something is wrong. These light levels, timings and other operating parameters can all be programmed with the DD-LCDHS-LR. This long range infrared programming handset allows the installer to adjust many built in functions from the safety of ground level.
Digital detectors can control up to 20 dimming ballasts while analogue detectors can control up to 10 dimming ballasts. Additional features include dimming functionality, two channel flexibility, scene setting and recall, step-down illuminance and lamp burn-in. User handsets are available to control on/off, lux levels and preset scenes.
For more information contact Karl Schlaphoff, Shorrock Automation, +27 (0)12 345 4449, [email protected], www.shorrock.co.za
Further reading:
Telco sensors in conveyor belt monitoring
Sensors & Transducers
Gail Norton Instrumentation Agencies has developed a low-maintenance conveyor belt monitoring unit built on robust Telco infrared sensors, detecting belt tear and misalignment reliably in harsh coal mining environments.
Read more...
Inductive ring sensors monitor material flow in feeding technology
ifm - South Africa
Sensors & Transducers
ifm’s inductive ring sensors detect metallic parts such as screws and nuts as they pass through tubes at speeds up to 35 m/s, enabling precise counting, flow control and blockage detection, with sensitivity and output functions configurable via IO-Link.
Read more...
Reliable 1D and 2D code reading made simple
SICK Automation Southern Africa
Sensors & Transducers
SICK’s new sensingCam SEC200 image-based code reader brings supermarket-checkout simplicity to logistics and industrial identification, reading 1D and 2D codes reliably with quick browser-based setup, rugged IP65 construction and CRA-compliant cybersecurity.
Read more...
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...
Expanding visibility in mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.
Read more...
printer friendly version