Fieldbus & Industrial Networking


Operating safely

September 2009 Fieldbus & Industrial Networking

Fibre-optic fieldbus systems in oil production.

Hirschmann networks recently developed oilfields in the United Arab Emirates with highly available fibre-optic fieldbuses.

Production has recently started at two new oilfields 50 km southwest of Abu Dhabi city, Rumaitha in the countries interior and Al Dabb’iya on the coast. The daily production capacity of the fields is about 100 000 barrels. The facilities for producing, storing and metering the crude oil have been in operation since late 2005. Operating safety is paramount here, so the process control system has been designed with full redundancy, and data is transmitted between the controllers and the remote I/O stations via fail-safe, redundant optical fibres. The danger of explosion that is inherent in such facilities presents a particular challenge. This challenge must be met with ATEX approved devices that are also capable of withstanding high ambient temperatures.

Project details

The process control is designed as a redundant system to specifically meet the customer’s demand for high process data availability. The process control units constructed by Honeywell provide a primary and a secondary Profibus DP interface with the remote I/O stations. HART information is recorded via an independent service bus using an RS485 interface. Optical cables and redundant optical rings ensure an exceptionally high level of operating safety. The cabinets, installed in explosion protection zone 2, include devices for properly isolating the intrinsically safe signals that are primarily used here for transmitting to zone 1 and zone 0. The power supplies for the remote I/O stations are designed redundantly. The cabinets have been engineered to prevent heat accumulation and they are also equipped with solar protection means. Otherwise, it would not be possible to keep the electronic components in the cabinet sufficiently cool in desert conditions.

Project parameters

* Profibus DP and HART communication.

* 15 km transmission length.

* 2600 process signals.

* 72 remote I/O stations.

* 176 OZD Profi 12M G12.

* 26 OZD Profi 12M G12-1300.

* 88 OZD 485 G12.

* 13 OZD 485 G12-1300.

Requirements

* High availability of the process control system.

* 85°C solar temperature.

* 52°C air temperature.

* 95% maximum air humidity.

* Explosion protection zones 2 and 1.

Solution

* Redundant control stations with two Profibus interfaces.

* Redundant communication via optical Profibus DP rings.

* Communication with HART management system.

* Switch cabinet designed for high operating temperature.

* Devices ATEX-approved.

Why Hirschmann

* Fibre-optic converter for Profibus DP.

* Fibre-optic converter for HART via RS485.

* Designs for long and medium segments.

* Redundancy with optical rings.

* ATEX approvals received.

For more information contact Profitek, +27 (0)12 664 4998, sales@profiteksa.com, www.profiteksa.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

EtherCAT interoperability removes industrial networking barriers
Fieldbus & Industrial Networking
Selecting the right communication technology is one of the most important decisions engineers make, and interoperability helps with that decision. Key development tools and standards ensure interoperability among many EtherCAT devices and manufacturers.

Read more...
Condition monitoring to go
Turck Banner Southern Africa Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.

Read more...
A new standard in high-speed Ethernet communication
Fieldbus & Industrial Networking
The TXMC897 module from TEWS Technologies supports a range of Ethernet standards and speeds, making it suitable for diverse applications, including the defence, industrial, and IIoT markets.

Read more...
Data-driven battery production
Turck Banner Southern Africa Fieldbus & Industrial Networking
The availability of high-performance batteries at moderate prices is one of the most important factors for the success of electromobility. As a long-standing automation partner to the automotive industry, Turck Banner supports the major battery manufacturers with its know-how.

Read more...
Bring critical temperature data to your condition monitoring system
Turck Banner Southern Africa Fieldbus & Industrial Networking
Data conversion just got easier. Turck Banner converters are compact, simple add-ons that seamlessly fit into your factory applications. You can take various types of signals such as discrete, analogue and many others, and convert them to protocols like IO-link, PICK-IQ, PWM/PFM, and Modbus.

Read more...
Case History 190: Measurement problem ruins level control.
Michael Brown Control Engineering Editor's Choice Fieldbus & Industrial Networking
The widely held belief in many plants that tuning will solve all base layer control problems is completely fallacious. Bad tuning is generally not the main reason for loops to perform badly. It is important when performing optimisation that all elements in a loop are considered, in addition to the control strategy, before even thinking of tuning.

Read more...
Precise part machining
Beckhoff Automation Editor's Choice Fieldbus & Industrial Networking
toolcraft manufactures on behalf of its customers using its 60 CNC machines, and designs, plans and builds turnkey production systems for companies in various industries, having added injection moulding, mould making and additive manufacturing technologies along the way. Robotics is the company’s newest technology division. This is why toolcraft relies on PC-based control, including in the production cells, which have seven-axis milling robots for machining components at CNC level.

Read more...
Fully digital vertical roller mills
Loesche South Africa Fieldbus & Industrial Networking
Vertical roller mills are found in mining and cement milling operations worldwide. They require complex technology for their operation. As a leader in this field, LOESCHE has proven software solutions for digitalisation that can optimise each piece of milling equipment for energy efficiency, and increase its availability and output, making the plant easy to operate.

Read more...
CNC cycle package for triple-axis milling and drilling
Beckhoff Automation Fieldbus & Industrial Networking
Beckhoff provides a comprehensive package of different cycles for triple-axis milling and drilling machines with the TwinCAT 3 CNC milling base.

Read more...
Precise machining of small parts
Beckhoff Automation Fieldbus & Industrial Networking
Producing large parts with precision is not easy. But how do you produce the smallest components, such as gears and screws for the watch industry or contact pins for connectors, with micron-level accuracy and in large quantities? Swiss companies Esco and Affolter achieve this feat in their CNC machines with TwinCAT CNC and servo drive technology from Beckhoff.

Read more...