classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

Technews Industry Guide - IIoT 2018

Technews Industry Guide - Maintenance, Reliability & Asset Optimisation

 

Model 2400 vibration transmitter
September 2014, Sensors & Transducers


The model 2400 vibration transmitter is an economically priced vibration monitoring device for predictive maintenance or protection against catastrophic failure.

Locally designed and manufactured by IQ Instruments, the model 2400 is a two wire loop powered 4-20 mA transmitter that interfaces easily to digital controllers, PLCs and scada systems. A variety of mounting options and ranges ensures that there is a model for almost every application. All popular options are usually available from stock and typical lead time for the less popular options is one week. The transmitter is supported by a locally manufactured digital indicator with alarms for local indication and standalone applications.

Every unit is individually calibrated on a Labworks computer controlled vibration table and is supplied with a calibration certificate.


Credit(s)
Supplied By: IQ Instruments
Tel: +27 11 792 1210
Fax: +27 11 793 6863
Email: sales@iqinstruments.co.za
www: www.iqinstruments.co.za
Share via email     Share via LinkedIn   Print this page

Further reading:

  • Collision avoidance in reverse gear
    January 2019, ifm Electronic RSA, Sensors & Transducers
    To avoid collisions during manoeuvring, ifm electronic offers an automatic collision avoidance system: a 3D camera mounted at the back of a vehicle monitors the rear area, detects objects in the travel ...
  • Telco sensors in conveyor belt monitoring
    January 2019, Gail Norton Instrumentation, Sensors & Transducers
    Ordinary belt monitoring units can detect belt failure, but many require frequent maintenance for reliable operation. This is why Telco designed a system that ensures peace of mind for the plant owner. The ...
  • Compact encoder with EtherCAT
    January 2019, Vepac Electronics, Sensors & Transducers
    Wachendorff Automation has extended its absolute encoder series WDGA with the addition of an EtherCAT interface. The WDGA58F is a miniature encoder with bus cover for the EtherCAT interface. Due to its ...
  • Barcode reader for complex ­applications
    January 2019, Westplex, Sensors & Transducers
    Cognex recently launched its new Dataman 470 barcode series. Most manufactured products use a 1-D or 2-D barcode to automate and simplify identification and capturing of data, but users must be able to ...
  • Multifunction counter is simple and reliable
    January 2019, Countapulse Controls, Sensors & Transducers
    Suitable for a wide range of applications such as time control, position indication, control of rotation speed and batch counting, the Hengstler Tico 772 multifunctional counter is extremely easy to use. ...
  • Humidity measurement in poultry farms
    December 2018, Instrotech, Sensors & Transducers
    Methods of farming chickens vary from country to country, however the general temperature and humidity conditions required for the three stages of chicken lifecycle are always similar. Temperature and ...
  • Anemometers for accurate wind measurements
    December 2018, GHM Messtechnik SA, Sensors & Transducers
    Delta Ohm, part of the GHM Messtechnik Group of Companies, recently launched a range of anemometers that offer wind speed measurement of superior accuracy and that are particularly suited for installation ...
  • Torque transducers for powertrains
    December 2018, Instrotech, Sensors & Transducers
    Climate change, urban air quality and the rising cost of energy have become the defining issues of the 21st century. With energy consumption and exhaust emissions from vehicles being significant contributors ...
  • Pressure measuring cell with ISP
    December 2018, ASSTech Process Electronics + Instrumentation, Sensors & Transducers
    A new addition to Jumo’s automation products is the Ceros S01 M pressure sensor with integrated signal processing (ISP), which is an active component that delivers a temperature-compensated and calibrated ...
  • Adjustable background suppression sensor
    December 2018, Turck Banner, Sensors & Transducers
    Banner Engineering’s newest addition to the popular QS18 Series product family is an electronic adjustable field background suppression sensor with barrel mount. Electronic adjustment provides a more ...
  • Vision sensor for colour inspections
    December 2018, Turck Banner, Sensors & Transducers
    Banner Engineering’s iVu series vision sensors are now available in models capable of colour inspections. iVu Colour sensors build on the inspection capabilities offered by other iVu vision sensors by ...
  • Food safety hazards and how to choose sensor solutions
    November 2018, Turck Banner, Sensors & Transducers
    This article outlines three of the most common food hazards that can result in recall and describes several sensor technologies that can help ensure food safety in each scenario.

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.