Instrotech is offering Keller’s digital pressure gauge for refrigeration systems. The exact vapour pressure curves of five different refrigerants are stored in Keller’s dV-2 Cool digital pressure gauge. This enables the prevailing cooling temperatures in closed cooling circuits to be derived and displayed by the integrated microprocessor.
Two versions of the digital pressure gauge with stainless steel measuring cell are available: for absolute pressures within the ranges of -1 bar to 40 bar, and -1 bar to 80 bar, respectively. These measure within the compensated temperature range of 0°C to 50°C with high accuracy and a tolerance of ±0,1% full-scale. Because of their high resolutions of 1 mbar and 2 mbar, respectively, the dV-2 Cool pressure gauges can also be used for measuring leaks in a vacuum.
The measurements are clearly legible on the LCD display, which can be rotated to the best viewing direction after installation. Depending on the environment, a special rubber surround is available for protection. Two buttons (‘Select’ and ‘Enter’) are available for operating the instrument and setting parameters such as the type of refrigerant. Users can also switch between units of bar/°C and psi/°F.
After switching on, the battery-operated instrument remains active for a period of 15 minutes and then goes into standby mode. Continuous measurements can be made for approximately two months without changing the batteries.
IO-Link transmitter for sanitary pressure monitoring Morton Controls
Pressure Measurement & Control
This temperature-compensated transmitter is ideal for sanitary pressure monitoring in a variety of applications in breweries, dairies and the beverage industry.
Read more...Pressure sensors for hygienic applications ifm - South Africa
Editor's Choice Pressure Measurement & Control
ifm’s new PI1xxx series offers measuring ranges from vacuum to 100 bar, communication via IO-Link 1.1, and resolution close to 20 000 steps.
Read more...Pressure transmitters for mobile machines
Pressure Measurement & Control
The thin-film measuring cell of the sensor is directly welded to the process connection and features high measuring accuracy and a short response time.
Read more...Compact infrared camera for the metal industry Instrotech
Temperature Measurement
The camera’s wide temperature measurement range of 450-1800°C satisfies practically all demands in the fields of metal production and processing.
Read more...3-point pressure calibration in 10 seconds WIKA Instruments
Pressure Measurement & Control
WIKA’s CPC3050 comes in high-pressure and low-pressure versions with customisable ranges, a 10:1 range limit ratio and auto-ranging.
Read more...Pressure transmitters for mobile machines ifm - South Africa
Pressure Measurement & Control
ifm electronic’s PT/PU-type sensors offer high vibration and shock resistance, a high degree of protection, and very good EMC resistance.
Read more...Flow meters and switches for very slow flows Instrotech
Flow Measurement & Control
Kobold’s KSV meters are shock resistant, small, lightweight and simple to install for measuring liquid or air flow with full-scale accuracy within +/-6%.
Read more...Load sensor for force measurement Instrotech
Level Measurement & Control Mass Measurement
The instrument provides a solution for non-intrusive level measurements of materials that are subject to uneven build-up, bridging or sidewall collection.