Sensors & Transducers


Telco sensors for refrigeration and storage

August 2021 Sensors & Transducers

Mobile racking enables compact storage while keeping the stored pallets individually accessible. Where storage space is expensive, for example in cold stores, mobile racking is the perfect solution. Telco Sensors makes sure safety is guaranteed by an infrared beam system, mounted on each mobile rack and at the outer sides of the complete installation.

The light transmitter (LT) and light receiver (LR) are installed so the beam runs parallel along the bottom edge of the storage rack, approximately 10 cm in front of it. If there is any object or person present, the beam will be blocked and the Telco amplifier (PA) will activate the output and the rack controller will deactivate the motors immediately. The rack will continue its movement as soon as the beam has been re-established.

The Telco 9000 series Spacemaster transmitter and receiver offer a solid state relay output as an alternative to the NPN/PNP transistor type. They also eliminate cross talk between four operating frequencies (channels), for 0-70 m self contained sensing.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

2D/3D profile sensor for weld seam tracking
ASSTech Process Electronics + Instrumentation Sensors & Transducers
Supporting software can evaluate two- and three-dimensional data from smart cameras, vision systems, profile sensors and IPCs with profile sensors.

Read more...
Standard-compliant differential current transformer
Beckhoff Automation Sensors & Transducers
The SCT5564 can be used as a residual current monitor and can measure DC and AC residual currents with up to 100 kHz frequency in the 0 to 2 A range.

Read more...
Wire-actuated encoder for crane arms and lifting platforms
Instrotech Sensors & Transducers
Siko has solved the challenges presented by such applications with the SG 30 and its very compact, yet robust, design.

Read more...
Ultrasonic distance sensor
ASSTech Process Electronics + Instrumentation Sensors & Transducers
Wenglor’s new ultrasonic distance sensors combine low installation depth and easy integration of the sensor with tried and tested ultrasonic technology, setting new standards in terms of range and integration options.

Read more...
Grist for the mill
Turck Banner Editor's Choice Sensors & Transducers
To meet the requirements of Swiss company Bühler with regard to its MHSA grain huller, Turck certified its contactless Li linear position sensor for use in the Ex area. Thanks to its contactless operating principle, the robust sensors are both maintenance-free and wear-free. They offer an impressive performance due to their optimum reproducibility, resolution and linearity over a large temperature range.

Read more...
Ex-rated strain gauge transducer
Turck Banner Sensors & Transducers
Turck Banner's IMX12-SG for force measurement applications in hazardous areas achieves response times below 10 ms and can be used as a repeater or signal converter.

Read more...
Concentration measurement with process sensors
Sensors & Transducers
To run chemical reactions in an optimal range and to control product quality, online concentration measurement is required. This ensures a fast intervention in case of concentration variation during ...

Read more...
Sensors for pulp and paper applications
Gail Norton Instrumentation Sensors & Transducers
Some of the toughest challenges for sensors are found in the pulp and paper industry. Here, high temperatures and a contaminated environment make it difficult for optical sensors to operate accurately ...

Read more...
Universal code reader for optimal reliability
Pepperl+Fuchs Sensors & Transducers
Camera-based code readers have already proven their worth in reading detailed data for automated processes, with the adaptability to suit many tasks.

Read more...
Working hand in hand to meet automotive OEMs’ strict requirements
Turck Banner Sensors & Transducers System Integration & Control Systems Design
The LASE Group, producer of machines and assembly cells for the automotive industry, places trust in its close collaboration with Turck Multiprox.

Read more...