The incessant need to reduce energy consumption is an ever present fact for all plant engineers. It is estimated that compressed air production and compressed air treatment amount to approximately 30% of an average production plants power consumption. SPX Flow, through Artic Driers International has introduced a radically new approach to compressed air drying.
The PCM compressed air dryer, (Phase Change Material) provides low dew point air via a unique and patented 4 in 1 heat exchanger.
The PCM material housed within a plate to plate heat exchanger possesses a high latent heat property that enables the material to melt or freeze at constant temperature. The phase change material will absorb heat from warm moisture laden compressed air without a significant change in temperature. The PCM material stays colder for longer periods of time. This system allows the Freon compressor within the dryer to cycle the Freon compressor with long off-time periods, resulting in great cost savings.
Energy Savings – The PCM dryer lowers the air system power costs and improves productivity by matching power consumption to compressed air demand. C/air loads fluctuate in any production facility. The PCM dryer cycles the power load to match c/air demand with great effectiveness.
As the load fluctuates the power requirement to dry the c/air is matched in proportion to the demand. As a comparison a non cycling dryer uses a constant 96% under any operating load. A PCM dryer when operating at 60% load only consumes 60% of its full load energy.
When compared with current non-cycling, variable speed drives, and older thermal mass type compressed air dryers, the PCM offers superior power savings, without the need to use complex VSD drives, coolant pumps or glycol tanks.
Along with all other quality air treatment packages and filtration systems manufactured by SPX Flow Busan, South Korea, Artic Driers provides the expertise and aftercare support to southern Africa as it has for the last 17 years. Whilst the markets and importers may have changed radically over the last three decades, Artic Driers core competency has grown and matured.
Artic Driers International, a family owned and operated c/air treatment supplier has provided support and compressed air treatment products since 1991.
A smarter approach to simplifying motion architecture
Motion Control & Drives
n motion system design, the wiring and drive placement between motor and drive are often decided by default, yet they shape a machine’s cost, footprint and adaptability. Kollmorgen sets out how single-cable and decentralised architectures simplify the cabinet.
Read more...Robotic case packer achieves 99% uptime Rockwell Automation
Motion Control & Drives
DCC Automation designed a new robotic case packer for a nutrition supplement manufacturer using delta robots and a unified Rockwell Automation control platform, cutting changeover time from 45 minutes to 5 minutes, and achieving 99 to 99,5% uptime against the previous 10% per-shift downtime.
Read more...igus puts 3D-printed wear materials to the test igus
Motion Control & Drives
A new igus white paper compares its tribological iglidur 3D-printing materials directly with conventional POM, reporting lower wear, more stable friction and up to ten times longer service life in gear testing for customised, low-volume and replacement components.
Read more...SEW-EURODRIVE’s expanded local engineering capability SEW-EURODRIVE
Editor's Choice Motion Control & Drives
At Electra Mining Africa, SEW-EURODRIVE demonstrated how its expanded local engineering capability, digital technologies and lifecycle support strategy help customers improve reliability, energy efficiency and total cost of ownership across the full life of their drive assets.
Read more...Latest Danfoss automation drive Bearing Man Group t/a BMG
Motion Control & Drives
BMG has launched the Danfoss iC7-Automation enclosed variable speed drive range in South Africa, backed by significant local stockholding of 400 V models up to 710 kW, approved warranty workshops, and DrivePro digital asset management support.
Read more...Severe-duty workhorses powering mining
Motion Control & Drives
Mining machines such as rock crushers, pumps and conveyors need motors that combine high torque with robust enclosures, seals and cooling. WEG Africa explains how severe-duty motors deliver more than a decade of reliable performance in harsh conditions while meeting modern energy-efficiency standards.
Read more...Looking beyond the spec sheet when choosing motion architecture
Motion Control & Drives
When machine builders focus only on torque, speed and price, engineering time, integration effort and long-term maintainability get overlooked. Kollmorgen explains how thinking at the system level, not the component level, leads to better motion architecture choices.
Read more...Economy drive system closes the drive gap in the entry-level segment Beckhoff Automation
Editor's Choice Motion Control & Drives
Beckhoff has launched an economy drive system pairing its new AX1000 servo drive and AM1000 servomotor with the AF1000 dual-axis variable frequency drive on a shared EtherCAT platform, targeting series machines and price-sensitive markets without sacrificing TwinCAT integration or functional safety.
Read more...Mammoet supports critical heavy lift and marine activities for topsides
Motion Control & Drives
Mammoet provided specialised heavy lift and marine logistics support for the Munin topsides on Aker BP’s Yggdrasil North Sea development, including a complex transshipment operation and a tidal-window load-out classified as a Class 1 operation.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version