Versatile control solution
April 2013
PLCs, DCSs & Controllers
The operator control station (OCS) combines a controller, operator interface, network and I/O into a single product and is comparable with a mid-sized PLC in terms of performance. Programmed by a single, powerful ladder logic software package, users can develop HMI screens as well as the control functions within the same software. Cscape simplifies the programming task by eliminating the need for two software packages as commonly associated with programming PLCs and HMIs.
Most of the products also feature the CAN port which can be used in either CsCAN or CANopen mode. Horner standard, called CsCAN, provides a powerful network to other units or scada at a minimal cost and provides a single point of connection to the network for programming, monitoring and troubleshooting. CANopen is an industry recognised standard that enables the connectivity options to third-party equipment, like drives and I/O modules. In addition to the CAN protocols, support is provided for serial Modbus RTU Master and Slave. Ethernet versions are also available that provide three common protocols including Modbus TCP/IP.
Users can choose from small text-based screens to large colour TFT screens, all integrated with the controller as one product and easily programmed. Extensive I/O range encompasses both digital and analogue modules. Smartstack I/O Modules, controlled by Maths Script Language, can be added to our larger units thereby enhancing their capabilities.
For more information contact Louis Lamprecht, Stock Electronics, +27 (0)78 801 8822, [email protected], www.seweb.co.za
Further reading:
Valmet’s automation powers world’s largest air-to-water heat pump
Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system for Helen’s Patola air-to-water heat pump plant and two electric boilers currently being built in Helsinki, Finland. When completed, the air-to-water heat pump plant will be the largest in the world with a full heating production capacity around 30 MW.
Read more...
All eyes on the modern DCS platform
Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...
Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...
Valmet’s supplies DCS to Europe’s largest electric boiler plant
Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...
Technology blueprint paves way for e-methanol fuel expansion
Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...
PCS Global delivers turnkey MCC installation in Botswana
PCS Global
Editor's Choice PLCs, DCSs & Controllers
PCS Global is delivering a turnkey containerised MCC installation for a major copper mining operation in Northwest Botswana.
Read more...
New energy-efficient evaporation line for dissolving pulp production
Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
Read more...
Valmet modernises turbine automation
Valmet South Africa
PLCs, DCSs & Controllers
Valmet has received an order to deliver a comprehensive replacement of plant DCS and turbine control systems at Ennatuurlijk’s combined cycle power plant in the Netherlands.
Read more...
Hybrid DCS for an evolving industrial landscape
Schneider Electric South Africa
PLCs, DCSs & Controllers
Today’s industrial automation continues to evolve at a blistering speed, which means traditional DCSs have to keep up to ensure continuous integration into modern, digital infrastructure.
Read more...
IIoT controller for the field and control cabinet
ifm - South Africa
PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.
Read more...
printer friendly version