Socket 478 industrial ATX motherboard

September 2005 PLCs, DCSs & Controllers

The AIMB-742 industrial grade motherboard, available from ProMicro, is designed with the Intel 865G chipset, which supports the Intel Pentium 4 Prescott processor with 400/533/800 MHz FSB (front side bus). The industrial grade motherboard is built on Intel's 90-nanometer production technology, which enhances the multitasking capabilities of hyper-threading (HT) technology and a larger 1 MB Level 2 (L2) cache. AIMB-742 is a powerful computing platform with advanced I/O features to satisfy any demanding industrial and network application.

AIMB-742 supports up to two SerialATA devices and dual channel DDR 400 SDRAM. It has an onboard AGP 8X graphic controller, eight USB 2.0 ports and supports 10/100Base-T Ethernet or 10/100/1000Base-T Ethernet. Its CMOS automatic backup and restore feature prevents accidental data loss of the BIOS set-up.

The industrial grade motherboard is compatible with other 1U, 2U, 4U, 5U and 7U chassis in the series. It is 304,8 x 228,6 mm in dimensions and has an onboard watchdog timer.

For more information contact Elton Prytz, ProMicro, 011 706 7913, [email protected], www.promicro.co.za

Further reading:

Network-capable remote relay system with flexible channel assignment
Phoenix Contact PLCs, DCSs & Controllers
Phoenix Contact has launched a modular PLC-Interface Ethernet Gateway remote relay system with up to 56 configurable I/O channels, multi-protocol support including Profinet Class C and S2 redundancy, and compatibility with established controller software for straightforward network integration.

Read more...

---

Seven checks before replacing an obsolete industrial control component
PLCs, DCSs & Controllers
An obsolete control component rarely fails in isolation. Before ordering an exact spare, manufacturer successor or engineered alternative, maintenance and procurement teams should work through seven checks to define the problem properly and avoid a costly mismatch.

Read more...

---

Loop signature Part 2-6
PLCs, DCSs & Controllers
This instalment of the Loop Signature series introduces frequency plot theory as a foundation for understanding process dynamics, explaining Bode plots, dynamic gain, phase lag and their relationship to control loop tuning.

Read more...

---

The rise of software-defined brownfield automation
Schneider Electric South Africa PLCs, DCSs & Controllers
Schneider Electric’s EcoStruxure Automation Expert is enabling brownfield operators to modernise incrementally, decoupling control logic from hardware to bridge legacy equipment and future-ready operations without disrupting production.

Read more...

---

Upgrading alarm systems for critical industries
Omniflex Remote Monitoring Specialists PLCs, DCSs & Controllers
Omniflex’s OMNI16R alarm annunciator platform provides a direct replacement for legacy CSA systems such as MPAS 90 and SA9100, enabling operators in oil and gas, nuclear and power generation to modernise alarm infrastructure without sacrificing the clarity required for safe operations.

Read more...

---

How DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa PLCs, DCSs & Controllers
Schneider Electric argues that virtualising DCS environments breaks the cycle of hardware obsolescence, giving plant operators a smarter path to lifecycle modernisation without production disruption.

Read more...

---

Loop signature Part 2-6
PLCs, DCSs & Controllers
The Loop Signature series turns to frequency plot theory, explaining Bode open-loop plots and how dynamic gain, phase lag and crossover frequency can be extracted from test data to inform more accurate control loop tuning.

Read more...

---

PC-based control in surgery
Beckhoff Automation Editor's Choice PLCs, DCSs & Controllers
Researchers at the University of Basel are using Beckhoff PC-based control technology to develop a miniature laser robot for minimally invasive bone surgery.

Read more...

---

IIoT controller for the field and control cabinet
ifm - South Africa PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.

Read more...

---

How the DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa PLCs, DCSs & Controllers
Ageing servers and unsupported operating systems are quietly eroding the stability of process plants that rely on distributed control systems. Kobus Vermeulen of Schneider Electric explains how virtualising the DCS environment can break the hardware obsolescence cycle without disrupting operations.

Read more...

---