Siko's new generation of magnetic rotary encoders to measure distance, rotational speed and angle, are impervious to environmental factors such as latent moisture, soiling or vibration which are often a cause of erroneous measurement results.
The contactless encoders are precise and robust, and available in three different housing materials - aluminium, die-cast or plastic - depending on application requirements. Both open and closed systems are supplied in various hollow and solid shaft types. Optional encapsulation of the electronics in the closed systems permit usage of oil baths, for example (this is standard for open types).
The incremental encoder, type IV58M, has a 58 mm servo or clamping flange with solid shafts up to 10 mm in diameter. The IH58M is torque supported with a through hollow shaft of up to 22 mm in diameter. Both types operate at up to 1280 pulses/revolution.
For rough environments, like mining and metal applications, the IG07M in die cast zinc housing, features a high axial and radial load capacity of the shaft, PP and LD24 output circuits, through hollow shaft diameters of up to 20 mm and a resolution of a max 1280 pulses/rev. The slim-line rotary encoder is a plastic housing, type IG09M for applications requiring a small installation depth.
Valmet’s automation powers world’s largest air-to-water heat pump Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system for Helen’s Patola air-to-water heat pump plant and two electric boilers currently being built in Helsinki, Finland. When completed, the air-to-water heat pump plant will be the largest in the world with a full heating production capacity around 30 MW.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
Read more...Sensors measure palm oil tank level Instrotech
Level Measurement & Control
The Senix ToughSonic 30 accurately measures and monitors the level of palm oil in large tanks approximately nine metres in height.
Read more...All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...Technology blueprint paves way for e-methanol fuel expansion Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...New energy-efficient evaporation line for dissolving pulp production Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version