Instrotech has four controllers on offer under the Calog brand. All feature an intuitive interface with scrolling text prompts and up to four setpoints.
The Calog Quad Process Controller: an advanced quad channel process controller with a virtually endless range of applications. Features include four process inputs (0/4-20 mA) with optional channel averaging across 2, 3, or 4 input channels. The device supplies 24 V excitation and is ideal for use in conjunction with a transmitter and it is easy to scale using low and high display values.
The Calog Quad RTD Controller: an advanced quad channel RTD controller ideal for industrial temperature applications. Features include four RTD inputs (Pt100 , 385/392/Cn10); the ability to average the inputs across 2, 3, or 4 input channels, and use this averaged value for a display source or for setpoint activation; intuitive interface with scrolling text prompts; a choice of either °C or °F display.
The Calog Quad Thermocouple Controller: an advanced quad channel thermocouple controller ideal for industrial temperature applications. Features include four thermocouple inputs (J/K/N/R/T type) and the ability to average the inputs across 2, 3, or 4 input channels, then use this averaged value for a display source or for setpoint activation. Also an intuitive interface with scrolling text prompts; and a choice of either °C or °F display.
The Calog Counter/Rate Batching Controller: an advanced controller with three independent counters, ideal for rate monitoring and batching applications. Features include: three independent hardware counters; quadrature (x1, x2, x4), NPN, PNP, TTL sensors and intelligent count modes where users can choose from a variety of smart formulae to suit the application. Advanced features for this model are batching, batch count modification, programmable input functions, setpoint latching and startup inhibit.
Optional features on all of the models are the 4-20 mA or 0-10 V analog output, the RS-232/RS-485 serial port and a data logging function.
Valmet’s automation powers world’s largest air-to-water heat pump Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system for Helen’s Patola air-to-water heat pump plant and two electric boilers currently being built in Helsinki, Finland. When completed, the air-to-water heat pump plant will be the largest in the world with a full heating production capacity around 30 MW.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
Read more...Sensors measure palm oil tank level Instrotech
Level Measurement & Control
The Senix ToughSonic 30 accurately measures and monitors the level of palm oil in large tanks approximately nine metres in height.
Read more...All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...Technology blueprint paves way for e-methanol fuel expansion Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...New energy-efficient evaporation line for dissolving pulp production Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version