The Rish V604 single channel programmable transmitter, now available from Timecount, converts input signals from DC current (0,08 to 100 mA) or voltage (2 mV to 40 V), DIN standard thermocouples, 3 or 4-wire resistance thermometer, remote sensor or potentiometer, to a proportional analog output signal.
All measuring ranges are programmed via PC using RS232 interface. The digital measured variable data is made available at the programming interface.
Output measuring range is 5 to 40 mA, 4 to 20 mA/5 to 10 V d.c. The output signal range is programmed using a PC and type of signal (current or voltage) via a DIP-switch. The device has 2 LED displays: green to indicate the transmitter is 'standing by' and red shows the operation of open-circuit or trip point. Power supply requirements are 45 to 400 Hz, 24 to 60 V d.c. or 85 to 230 V a.c.
For more information contact Jos Laurencik, Timecount, 011 882 3105, [email protected]
All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...Technology blueprint paves way for e-methanol fuel expansion Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...New energy-efficient evaporation line for dissolving pulp production Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
Read more...Valmet modernises turbine automation Valmet South Africa
PLCs, DCSs & Controllers
Valmet has received an order to deliver a comprehensive replacement of plant DCS and turbine control systems at Ennatuurlijk’s combined cycle power plant in the Netherlands.
Read more...Hybrid DCS for an evolving industrial landscape Schneider Electric South Africa
PLCs, DCSs & Controllers
Today’s industrial automation continues to evolve at a blistering speed, which means traditional DCSs have to keep up to ensure continuous integration into modern, digital infrastructure.
Read more...Bringing the benefits of Ethernet to hazardous industrial environments ABB South Africa
PLCs, DCSs & Controllers
Christian Johansson, global product manager for ABB Process Automation explains how Ethernet-APL lets plant owners unlock more value from their process data, optimise performance and promote safer operations.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version