Designed with both the installer and user in mind, LSIS has introduced its simple to install and easy to operate standard S100 drive. The powerful dual-rated unit is perfect for general applications such as pumps, fans, conveyors, mixers, milling, etc. and has a diverse range of user friendly functions delivering added value to users.
The series has a heavy and normal duty operation rating. In a normal duty application, for example a pump or fan, designers could opt to de-rate the drive. These ratings are available in the parameters and can be optimised as the requirements demand. Overload capacity: heavy duty operation – 150% of rated current, 60 seconds and normal duty operation – 120% of rated current, 60 seconds. Other features include:
• Powerful sensor-less control: offering an open loop starting torque of 200%/0.5 Hz providing higher power and torque in the low speed ranges.
• Selectable rotary/standstill auto-tuning: user flexibility to choose standstill instead of rotational auto-tuning where the motor cannot be rotated due to installation or application conditions, while offering full tuning parameter optimisation.
• Side by side installation: minimised distance between products enables panel size reduction when installing multiple S100 drives.
• Main capacitor lifecycle estimator: calculated through monitoring the change in the capacitance of the main DC bus.
• Cooling fan lifecycle estimator: warning signal is displayed when the cooling fan is operated over a pre-determined amount of running hours.
• Built-in DC reactor: effective in improving power factor and decreasing THD.
• Various field networks: integration to a variety of field networks with easy installation and setup. (Profibus, DeviceNet, Ethernet IP, Modbus TCP, CANopen, EtherCAT, etc.)
• Built-in safety torque off: Safety input function meets EN ISO 13849-1 PLd and EN 61508 SIL2 (En 60204-1, stop category 0). This feature enables users to meet current international safety standards.
• Global compliance: global standard compliance UL, CE, Gost, C-tick and cUL.
SEW-EURODRIVE drives innovation at automotive plant SEW-EURODRIVE
Motion Control & Drives
[Sponsored] A major automotive manufacturer in Gauteng has boosted its operational efficiency, safety and energy savings with the installation of SEW-EURODRIVE’s advanced MOVIGEAR mechatronic drive system in its newly expanded buffering zone.
Read more...Reimagining rotation for a circular and sustainable future SKF South Africa
Motion Control & Drives
Through the design and manufacture of components with sustainability at their core, SKF is reimagining the future of rotation, rolling away from traditional, consumable-based thinking toward a smarter, more sustainable circular approach.”
Read more...Optimising operational efficiencies through advanced filtration systems Bearing Man Group t/a BMG
Motion Control & Drives
Filtration is the only effective defense against wear and tear when contaminants are present. It is therefore critical that effective filter components are correctly used to ensure dependable performance, high efficiency and extended service life of machinery and vehicles.
Read more...A world first in maintenance
Motion Control & Drives
Lutz Pumpen has therefore developed a filling tool called Lutz Lube Drive, which considerably simplifies the maintenance process. The idea is that a commercial cordless screwdriver becomes the motor of a pump tube.
Read more...The future of robotics
Motion Control & Drives
Research into robotics and autonomy uncovers some of the up-and-coming industrial uses and applications within the sector, including for automotives and logistics, as well as for personal and commercial use.
Read more...Epiroc strengthens productivity and sustainability
Motion Control & Drives
Epiroc is accelerating the transformation towards more productive and sustainable mining operations with the introduction of the new Minetruck MT22. The new 22-ton underground truck is designed for mining operations with small drift sizes, delivering increased effectiveness, reduced exhaust emissions, lower fuel consumption and extended service intervals.
Read more...Hoist gives better load control
Motion Control & Drives
An important criterion for lifting equipment is that it is correctly loaded and balanced in order to avoid mechanical failures and accidents. More importantly, operator safety is enhanced as a result of correct load control, which reduces the possibility of damage to the materials and goods being lifted.
Read more...PC-based control in window and door production Beckhoff Automation
Motion Control & Drives
Belgian machine builders CNC Solutions and Calvet are automating previously manual processes in aluminium window and door production. High-performance drive technology, motion control and electric cylinders from Beckhoff proved crucial in equipping the machine with the necessary finesse when pressing the window frames.
Read more...World-class hoist maintenance ABB South Africa
Motion Control & Drives
In underground mining, hoists are among the most significant investments a company can make. ABB has developed ABB Care for Hoisting, designed to help mining companies transition from reactive or even preventive maintenance approaches to a truly predictive model, maximising hoist performance, extending asset life, and safeguarding operational continuity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version