Motion Control & Drives


Movitrans contactless energy transfer system

August 2017 Motion Control & Drives

SEW-Eurodrive’s Movitrans contactless energy transfer system is based on inductive energy transfer, whereby electrical energy is transferred without contact from a fixed conductor. The electromagnetic connection required is made via an air gap, which means it is not subject to wear, making it maintenance-free and cost-effective. Another important advantage of this type of power supply is that it is emission-free, and therefore environmentally friendly.

The company recently installed the system at a major wax manufacturer, which produces a range of hard and medium waxes, all with different product codes, colours, hardness, and other special properties. As soon as a pallet is loaded, it is conveyed towards the aligned transfer trolley. The pallet then moves across to align with the exit conveyor, which takes it to the pallet-wrapping machine.

The two transverse trolleys each service conveyor lines from one of the packing robots, which were powered traditionally by drag chains in the centre of the rails. The transverse pallet trolleys each have two motors, one to drive the conveyor rollers, and the other to move the trolley along the rails.

Traditionally these were powered via a drag chain that carried the power and communication cables. This was not an ideal solution, as the chain links would become clogged with wax, impeding their free movement. Operators were required to step into the cell when this happened to align the trolleys properly, often stepping on the chain inadvertently and causing it to break, resulting in costly downtime for repair or replacement.

Movitrans provided the ideal solution

“This is where the Movitrans contactless energy transfer system provided an ideal solution,” comments national sales manager Norman Maleka. The project required a two-stage installation, commencing with instrumentation and communication. A wireless Profibus system was installed to send control signals to the moving trolleys to avoid the need for communication cables in the drag chain.

In addition, a laser-based direct line-of-sight optical system was adopted to send signals to the moving trolleys. At the same time, the trolleys were modified to operate off SEW-Eurodrive’s Movimot gearmotor drives. This is a compact modular VSD-driven system that uses the Profibus-compatible Movilink protocol for serial communication.

A line-cable loop was installed on the floor of the wax plant, covered by installation plates between the rails of the transverse trolleys to avoid cutting a groove on the concrete floor. This resulted in a quick and easy installation process that was both efficient and cost-effective, with no moving parts that could be damaged.

Two pick-up plates under each trolley transfer the electrical power to the Movimot gearmotor drives. Energy-transfer efficiency is enhanced by generating medium-frequency AC current. Three-phase mains power is converted into 25 kHz single-phase supply, which passes through the inductive loop on the floor. This induces a flow of AC current in the pick-ups under each trolley. The AC supply is rectified again on the trolley, and converted before being passed into the Movimot inverters for use by the motors.

“Movitrans is the ideal power-supply system for any mobile application, such as when the equipment in question has to cover long distances, or where there is a particular requirement for a high-speed, maintenance-free energy transfer,” comments Maleka. “Applications include conveyor trolleys, transport systems in logistics centres, linear-motion platforms with elevating tables or battery-charging supply units, overhead trolley systems, floor conveyors such as automated guided vehicles, and storage and retrieval systems.

Another advantage is that Movitrans has been tested according to BGV B11. Independent testing also revealed that the measured values of the system are significantly below the permitted values defined in the standard, which means that the contactless energy transfer system poses no health and safety risk whatsoever.

For more information contact Jana Klut, SEW-Eurodrive, +27 (0)11 248 7000, [email protected], www.sew.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Turbomachinery controls: the call of duty
Schneider Electric South Africa Motion Control & Drives
There’s a lot to be said about the unsung heroes of this world; those men, women and machines that deliver such important functions, often overlooked and recognised. One such machine is turbomachinery, and while the name does sound quite obvious to the layman, its rich history and daily functions are not.

Read more...
More movement in the market
Motion Control & Drives
Aerotech aims to revolutionise the market for precision motion and machine controls with an intuitive control platform.

Read more...
Tapered roller bearings for wind turbines
Motion Control & Drives
A leading European manufacturer of wind turbines will use NSK’s tapered roller bearings with high load capacity in the gearboxes of its 15 MW class offshore wind turbines. The decision to specify the next-generation NSK roller bearings hinged on several key factors.

Read more...
Efficient maintenance counts
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s total plant management solutions encompass a technical advisory service for maintenance programmes that includes correct chain and sprocket selection, which is a critical factor in any power transmission system.

Read more...
Automating drive systems for efficiency and reliability
SEW-EURODRIVE Motion Control & Drives
Already in use by leading global manufacturers in South Africa, SEW-EURODRIVE’s innovative MOVI-C modular automation system will bring a new level of flexibility, integration and efficiency to a wide range of sectors.

Read more...
Monitoring vibration allows for equipment longevity
Iritron Motion Control & Drives
Unscheduled downtime and maintenance on machines is often a source of frustration for many companies active in industrial manufacturing as it results in loss of process and productivity, which in turn equates to loss of revenue.

Read more...
Driving innovation in robotics and automation
Yaskawa Southern Africa Motion Control & Drives
Maintaining a competitive edge in a rapidly changing industrial landscape means embracing new technologies and adapting to evolving market demands. Yaskawa Southern Africa has positioned itself as a leader in robotics and automation, particularly in areas such as palletising, materials handling and advanced manufacturing

Read more...
Regular maintenance of cutting fluids is essential to maintain quality
Motion Control & Drives
Regular cleaning and maintenance of cutting fluid systems significantly enhances overall efficiency by extending the life of the cutting fluids, reducing downtime and improving the quality of the end products.

Read more...
Tough chain and induction hardened sprockets
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s Tsubaki Titan chain series offers significant improvements in wear life, particularly in demanding applications like abrasive and dusty conditions.

Read more...
Rethinking common approaches to wire rope lubrication
Motion Control & Drives
Wire ropes are hard-working components in many different applications, from mines to lifts, ports, construction sites and drainage systems. Correct lubrication of wire ropes is absolutely critical because wire ropes are more than just cables, they are intricate machines composed of interdependent parts in constant motion.

Read more...