Multisystem room automation is of great importance both for efficient operation of buildings and for the individual comfort of users and, over and above that, to offer substantial savings potential. In the Beckhoff I/O system, an extensive range of over 400 bus terminals is available to building technicians for the connection of all building sensors and actuator systems.
The new BC9191 room controller closes the gap in price-sensitive projects with firmly defined functions. By bundling certain functions in one module, the compact controllers are ideally suited, for example, for installation in hotel rooms or office spaces. Rooms or areas with repetitive requirements only require one-time programming of the room controller, which is then simply duplicated, depending on the number.
The BC9191 can be used as a compact controller or as decentralised intelligence for room control. Pre-installed software functions facilitate commissioning, and, on top of that, the BC9191 can also be freely programmed using the TwinCAT automation software. For networking, the room controller is equipped with two Ethernet ports with integrated 2-channel switch. The I/O stations can thus be configured with a line topology, instead of the classic star topology.
In order to implement additional functions, the BC9191 can be modularly extended with the entire range of bus terminals via the K-bus interface. Standard terminals and the sub-bus systems relevant for building automation, such as EnOcean, LON, EIB, DALI and M-bus, are optionally expandable.
All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...Technology blueprint paves way for e-methanol fuel expansion Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...PC-based control in the plastics industry Beckhoff Automation
Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Editor's Choice Motion Control & Drives
Special machine manufacturer, ruhlamat Huarui Automation Technologies has unveiled the second generation of its mass production line for flexible stators with bar winding (pins). This enables an extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...New energy-efficient evaporation line for dissolving pulp production Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
Read more...Hans Beckhoff receives German Mechanical Engineering Award Beckhoff Automation
News
Hans Beckhoff has received the 2025 German Mechanical Engineering Award. This prestigious award honours entrepreneurs who have set standards in machine and system engineering, driven innovation, and taken on social responsibility.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version