AC/DC digital clamp meter
August 2014
Electrical Power & Protection
Megger’s DCM340 is a highly versatile instrument and is ideal for use in the installation, maintenance, monitoring or checking of AC or DC electrical systems and equipment. The DCM340 is capable of measuring AC and DC currents up to 600 A; AC and DC voltage up to 600 V; resistance up to 400 Ω; and frequency up to 400 Hz.
Current measurement combined with the comprehensive and accurate multimeter functions of the DCM340 eliminate the need to carry around both a clampmeter and multimeter, as this instrument does it all. The large clear digits of the numeric display are complemented by the high resolution digital bar graph, useful for indicating trending and fluctuation of measurement. The backlight assists use in poorly lit areas such as distribution cupboards and corners of switchrooms; and the data-hold feature enables use on difficult access cables where otherwise the display may be impossible to see.
Min/Max hold provides the ability to store the maximum and minimum DC or rms values over a period of time. While storage is taking place, either the present, maximum or minimum value can be displayed. Peak hold stores the maximum and minimum peak value of an AC signal at a 10 ms sample rate. The auto-off feature automatically places the meter in power-save mode after 30 minutes from power-on, but this can be disabled if required for min/max measurements. The DCM340 is safety rated to IEC 61010-1 Cat III 600 V and is drop-tested to 1,2 m onto a hard floor. It is supplied with test leads and a carry case, and a full one year manufacturer’s warranty.
For more information contact Esias Labuschagne, Surgetek, +27 (0)11 792 1303, [email protected], www.surgetek.co.za
Further reading:
Overcoming the bottling industry’s fragmented visibility
Schneider Electric South Africa
IT in Manufacturing Electrical Power & Protection
Beverage bottling facilities are among manufacturing’s most energy-intensive environments, yet many still operate without granular insight into where that energy goes. Rezolia Muller-Potluri of Schneider Electric explains how tiered metering architecture and advanced
Read more...
Schneider Electric introduces next-generation BlokSeT switchboard
Schneider Electric South Africa
Electrical Power & Protection
Schneider Electric has launched its next-generation BlokSeT low-voltage switchboard in West Africa, offering high reliability, predictive maintenance capability and digital integration for critical infrastructure and industrial applications.
Read more...
Powering South Africa’s renewable energy expansion
Electrical Power & Protection
ACTOM Distribution Transformers, the sole NECRT contract holder for Eskom, is powering South Africa’s renewable energy expansion through robust neutral earthing transformer solutions deployed across solar and wind projects in southern Africa.
Read more...
You can’t digitise a blackout
Schneider Electric South Africa
Electrical Power & Protection
Across East Africa, smart meters and AI promise cleaner, more reliable power, but digital tools cannot optimise a grid too weak to carry the load. Schneider Electric’s Symphrose Ochieng sets out why operators should strengthen physical infrastructure first, then add digital capability in phases.
Read more...
Battery energy storage is key to powering South Africa’s manufacturing sector
Electrical Power & Protection
South Africa’s shift to renewables is creating a significant opportunity in battery energy storage, but local manufacturers face an uphill battle against cheap imports and stop-start demand. Richard van Moltke of ACTOM Static Power examines what it will take to build a sustainable local battery storage industry.
Read more...
Decarbonisation is reshaping mining strategy in Africa
Schneider Electric South Africa
IT in Manufacturing Electrical Power & Protection
Mining companies across Africa are embedding decarbonisation into operational strategy, driven by investor, regulatory and customer pressure to reduce emissions while improving resilience.
Read more...
How to tell whether your mini-substation is new or refurbished
Electrical Power & Protection
Cosmetically refurbished mini-substations are being misrepresented as new equipment and sold back into the market, posing serious reliability and safety risks for mining, industrial and commercial operations. Trafo Power Solutions explains what to look for and what questions to ask before purchasing.
Read more...
Optimising energy reliability for African manufacturing
Electrical Power & Protection IT in Manufacturing
Unreliable power can cost African manufacturers as much as 31% in sales. Behind-the-meter power offers manufacturers in sub-Saharan Africa control, visibility and resilience in their energy provisioning.
Read more...
Electrical solutions for FMCG manufacturing giant
Electrical Power & Protection
An electrical upgrade at a leading fast-moving consumer goods facility demonstrates how ACTOM Kenya turned a fragile, reactive power infrastructure into a resilient, data-driven backbone for production. The project is also a case study in bridging legacy equipment with modern automation without disrupting operations.
Read more...
Power and energy meter with Modbus RTU interface
Vepac Electronics
Electrical Power & Protection
The eCap universal power and net quality meter measures voltages, currents, power, power factor, energy, frequency and total harmonic distortion, with fully galvanically isolated transmission via an integrated Modbus RTU/RS485 interface.
Read more...
printer friendly version