120 Watt battery charger
December 2010
Electrical Power & Protection
Mean Well has further expanded its AC/DC battery charger line with the introduction of the GC120 series – 120 W green charger with low power consumption and high efficiency. With very low no load power consumption (<0,5 W) and up to 91% efficiency, the series is energy-saving in both standby and active modes. Featuring 2-stage fast charging characteristics, GC120 charges batteries quickly and efficiently and is suitable for lead-acid, Lithium-Mn and Lithium-Fe types.
Charging is based on a two stage curve, constant current followed by constant voltage, with battery status monitored via the terminal voltage. This allows the device to charge the battery quickly in constant current mode from a low battery capacity status.
Using the standard IEC320-C14 inlet as the input connector, these Class I units are designed to protect users from electrical shock and are especially suitable for charging electric scooters, bicycles and wheelchairs. Featuring 85-264 VAC full range input and built-in active PFC, the GC120 series complies with the harmonic requirements per EN61000-3-2. Other standard features include 2-colour LED indicator for charging status, short circuit, over-voltage, and over temperature protections and compliance with global standards per UL, TUV, CB, FCC and CE.
For more information contact Ettienne van der Westhuyzen, Current Automation, +27 (0)11 462 4253, ettienne@switches.co.za, www.rectifier.co.za
Further reading:
High-performance industrial power converters
Electrical Power & Protection
Vepac Electronics supplies PowerGood’s range of industrial AC/DC and DC/DC converters, spanning 15 W to 700 W, with full protection features and compliance with EN55032 Class A and Class B electromagnetic interference standards.
Read more...
Decarbonising the energies and chemical industry without the risk
Schneider Electric South Africa
Electrical Power & Protection
Schneider Electric argues that decarbonisation in Africa’s energies and chemical industry need not compromise production or profitability. A phased, digitally enabled approach, starting with energy efficiency improvements, can reduce emissions while strengthening competitiveness.
Read more...
Modular UPS system with scalable, high-availability architecture
Electrical Power & Protection
Legrand South Africa has launched its fifth-generation TriMOD three-phase modular UPS, available from 10 to 80 kW. The system features hot-swappable modules, multiple input/output configurations, and up to 99% efficiency in Eco Mode, designed for data centres and critical industrial environments.
Read more...
Accurate illuminance measurement for safer, more efficient environments
Electrical Power & Protection
The Sonel LXP-10A illuminance meter is designed for accurate measurement of lighting levels in industrial environments where adequate illumination is essential.
Read more...
Why mining operations need local lightning early warning
Senseca
Editor's Choice Electrical Power & Protection
Lightning can develop into a serious mining hazard before the first local strike, leaving crews little time to stop work and reach safety. Local early-warning technology can provide valuable lead time, allowing mines to connect developing storm conditions to defined trigger actions that protect people, explosives and equipment.
Read more...
South Africa’s dirtiest fuel is building its most resilient boilers
Electrical Power & Protection
Steinmüller Africa argues that duff coal, the low-grade fines and discards stockpiled over decades, can now underpin reliable, compliant industrial boilers using mature circulating fluidised bed combustion technology, turning a long-standing liability into a phased energy transition pathway.
Read more...
Retrofitting for sustainability
Schneider Electric South Africa
Electrical Power & Protection
As budgets tighten and sustainability targets increase, retrofit and modernisation strategies are gaining traction across Africa, allowing organisations to upgrade only what limits performance while preserving existing infrastructure and extending asset life.
Read more...
USB-Datalogger for voltage 0 to 30 V DC
Vepac Electronics
Electrical Power & Protection
The PeakTech 5186 is a data logger for DC voltages from 0 V to 30 V with terminals on the top of the device.
Read more...
Pole-top boxes for smarter, more secure electricity networks
Electrical Power & Protection
As South Africa accelerates the rollout of smart prepaid electricity metering, innovative enclosure technology from Power Process Systems is helping utilities improve network security, reduce electricity theft and protect critical electrical infrastructure.
Read more...
Simplifying electrical design compliance
Electrical Power & Protection
Referro Systems highlights how Rockwell Automation’s Global SCCR Tool simplifies short-circuit current rating compliance for complex industrial electrical systems.
Read more...