Outdoor industrial wireless solution

December 2010 Fieldbus & Industrial Networking

Advantech unveils outdoor access point to enhance coverage and mobile connectivity.

Advantech has unveiled a new high performance industrial wireless outdoor solution, three IEEE 802.11a/b/g single to triple radio access points (EKI-6321/2/3AG). These outdoor AP/bridges/clients incorporate daisy-chain mesh and ultra fast roaming technology to enhance long range wireless coverage and mobile connectivity.

By offering concurrent 802.11a and 802.11b/g dual or triple radio connectivity, the aggregate bandwidth available on the network increases, providing seamless redundancy. IP67 ratings and wide operating temperatures offer robust performance, and watertight and weatherproof cases allow these devices to be used in harsh outdoor applications, such as in traffic monitoring and city surveillance.

“Advantech’s daisy-chain mesh technology extends wireless coverage and maintains high throughput rates of 12-15 Mbps. The ultra fast roaming with handover switching provides seamless video streaming or passenger information transmissions for vehicles travelling under 140 km/hr,” said Fons de Leeuw of Profitek Industrial Communications.

Other key features include:

* Four intelligent bandwidth management modes: trunking, smart traffic load balance, one-way transmission, failover redundancy.

* Wide operating temperature range: -35-70°C.

* Multimode in AP, client, bridge (point-to-point, point-to-multipoint).

* Enhanced thermal design.

For more information contact Fons de Leeuw, Profitek Industrial Communications, 086 1 654 321, [email protected], www.profiteksa.com

Further reading:

Introduction to Part 2 loop signatures and process transfer functions
Fieldbus & Industrial Networking
The previous series of loop signature articles dealt with the basics of control loop optimisation, and concentrated on troubleshooting and ‘SWAG’ tuning of simple processes. In this new series, consideration will be given to dealing practically with more difficult issues like interactive processes, and with processes with much more complex dynamics.

Read more...

---

Siemens sets new standards in drive technology
Fieldbus & Industrial Networking
Siemens is setting new standards in industrial drive technology with the launch of its new high-performance drive system, Sinamics S220. This offers a seamless and innovative drive system with comprehensive simulation and analysis capabilities and advanced connectivity features that enable full integration into digital work processes.

Read more...

---

PC-based control in the plastics industry
Beckhoff Automation Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.

Read more...

---

Loop Signature 31: Non-linearity in control loops (Part 2)
Michael Brown Control Engineering Fieldbus & Industrial Networking
This article is a continuation of Loop Signature 30 published in the last issue in this series, exploring reasons for non-linearities which may be encountered in feedback control loops

Read more...

---

PC-based control optimises robotic parts handling on plastics machinery
Beckhoff Automation Editor's Choice Fieldbus & Industrial Networking
NEO is a cartesian robot developed by INAUTOM Robótica in Portugal for parts removal on plastics machinery. Its aim is to increase system productivity. NAUTOM Robótica has entered into a strategic partnership with Bresimar Automação to increase the working speed of the cartesian robots using advanced control and motion solutions from Beckhoff. The result is a comprehensive, future-proof automation solution for its entire family of cartesian robots.

Read more...

---

PC-based control for flat wire motors for electric vehicles
Beckhoff Automation Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.

Read more...

---

Case History 200: The final case history – desuperheater control problem.
Michael Brown Control Engineering Editor's Choice Fieldbus & Industrial Networking
For this final article I have chosen to relate a problem that existed in a desuperheater temperature control on a boiler in a petrochemical refinery.

Read more...

---

PC-based control technology in additive manufacturing
Beckhoff Automation Editor's Choice Fieldbus & Industrial Networking
As an open control platform, PC-based control supports different engineering approaches, including low-code programming. The machine builder, Additive Industries uses this to create the code for the TwinCAT runtime of its 3D printers.

Read more...

---

Suppression and safety solutions for fire and gas in mission-critical industries
Fieldbus & Industrial Networking
By representing world-leading brands and focusing on fully integrated, certified systems, HMA South Africa is positioning itself as a trusted partner in fire detection, suppression and explosion-proof safety solutions across the continent.

Read more...

---

Integrating fire alarm systems into building management systems
Beckhoff Automation Fieldbus & Industrial Networking
Fire alarm systems work independently of the building automation system. Schrack Seconet has developed a flexible gateway using ultra-compact industrial PCs and TwinCAT from Beckhoff, which can be used to flexibly convert a customer-specific communication protocol to a wide range of transmission standards.

Read more...

---