July 2007Maintenance, Test & Measurement, Calibration
The Keller Explorer DC-22 is an autonomous battery powered instrument designed to record pressure/water depth and temperature over long periods. Two versions are available from Instrotech.
The DC-22 comprises sensor, electronics and battery which are housed in a sealed stainless steel (22 mm diameter) tube for submersible applications. For data readout, the DC-22 must be separated from the measurement point and the O-ring sealed end cap removed.
The DC-22 G utilises a sealed sensor and electronics for submersible usage. The sensor is connected by a sealed cable to a 46 mm diameter battery housing which incorporates the data read-out port. This arrangement allows for easier data recovery from fixed installations. The sensor can be absolute or vented gauge. For gauge version sensors the cable carries the vent tube. Due to its larger size the battery life is significantly increased. However, for space limited applications, the DC-22G is also available with a smaller 22 mm diameter battery housing.
The programming of the Explorer (data, starting and ending time of recordings, measuring cycle) and the read out of the stored values, take place via a special data cable and the Logger 1 software which are both included as standard.
The loggers offer several processing variants to allow data to be presented in graphic and tabulated displays or exported into other Windows programs.
The Explorer DC-22 incorporates an absolute pressure sensor. At low pressures, where the influence of ambient pressure deviations has to be considered, an Explorer DC-22 BARO (barometric) is placed at the surface. Both Explorers are calibrated against vacuum (absolute). The ambient pressure values of the DC-22 BARO are subsequently subtracted in the software.
Groundwater level measurement using LoRa module Instrotech
Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.
Read more...Infrared solutions for glass manufacturing challenges Instrotech
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Keeping lifting equipment safe and securely on track
Maintenance, Test & Measurement, Calibration
In the hustle and bustle of mining production, the focus on the servicing of lifting equipment can unintentionally be sidelined. This situation can easily be avoided with a customised Konecranes Service Agreement that offers a comprehensive and systematic approach to asset management.
Read more...Tablet oscilloscope Vepac Electronics
Maintenance, Test & Measurement, Calibration
The PeakTech 1212 is a new, innovative oscilloscope designed to resemble a standard tablet in size and form. This tablet oscilloscope allows users to record any common measurement quantity and type, just like a desktop oscilloscope.
Read more...Powerful test controller
Maintenance, Test & Measurement, Calibration
XJTAG is launching the XJLink-PF20, brings the same dependability and robustness to a new 4-TAP two-port configuration, and offering both functional and JTAG boundary scan testing with the XJTAG testing suite’s long-established power and control.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
Read more...Multichannel AWGs for GHz signal generation Vepac Electronics
Maintenance, Test & Measurement, Calibration
Spectrum Instrumentation has introduced its new flagship Arbitrary Waveform Generators from the company’s Netbox series, an easy-to-use instrument line that can be controlled via an Ethernet cable from any PC or network.
Read more...Sensors measure palm oil tank level Instrotech
Level Measurement & Control
The Senix ToughSonic 30 accurately measures and monitors the level of palm oil in large tanks approximately nine metres in height.
Read more...The smart choice for test and measurement solutions RS South Africa
Maintenance, Test & Measurement, Calibration
As the demand for precision and efficiency continues to grow across industries, RS PRO, the own brand of RS, provides a complete portfolio of test and measurement equipment engineered to meet the highest standards of performance, safety and value.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version