Non-destructive and non-extractive process analyser
January 2007
Analytical Instrumentation & Environmental Monitoring
The Quantum 1200 Process Analysers from LT Industries measure many process variables simultaneously, over 10 constituents in the same stream. Multipoint sampling and/or multiple application capabilities are supported up to 20 stations. The sampling process is non-destructive and non-extractive, involving none of the sample preparation required by other testing technologies. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions.
A pre-dispersed monochromatic beam of light travels through the patented harmonic drive grating mechanism where it is separated into discrete wavelengths and sent through a fibre-optic link to illuminate the sample. The light transmitted back through the fibre-optic link is converted into an electrical signal, which is compared by the microprocessor to the calibrated responses in memory. The data output results of this comparison are then used for process control.
Multichannel digital or analog outputs are available, and the harmonic oscillating drive mechanism filters out all environmental shock and vibration.
The series is supported by the full line of FibreLine NIR probes, flow-through cells, fibre-optics and other sampling accessories. The Process Analyser Series is capable of multiplexing for multiple sampling points and can be programmed to analyse multiconstituents, reactions and/or processes.
LT Industries is represented locally by OEN Enterprises.
For more information contact Noel Bauchop, OEN Enterprises, +27 (0) 11 675 4447, [email protected], www.oenenterprises.co.za
Further reading:
Precision in every drop, powered by ICP technology
Wearcheck
Analytical Instrumentation & Environmental Monitoring
Elemental profiling using Inductively Coupled Plasma – Optical Emission spectroscopy provides useful information on the chemical composition of lubricants.
Read more...
A trusted oxygen analyser back in action
Elemental Analytics
Analytical Instrumentation & Environmental Monitoring
After a period of discontinuation, Servomex’s Oxy 1810 oxygen analyser has officially returned.
Read more...
Multi-channel pH and conductivity controller for the water sector
Senseca
Analytical Instrumentation & Environmental Monitoring
The measurement of pH and conductivity plays an integral role in water systems. Senseca South Africa has introduced a multi-channel controller that allows the connection of up to five digital sensors and a frequency-emitting flow sensor.
Read more...
DEKRA Industrial sets new standards for asset integrity in local petrochemical sector
Analytical Instrumentation & Environmental Monitoring
DEKRA Industrial South Africa has strengthened its position as a leader in hydrogen-induced cracking inspections through a strategic combination of advanced non-destructive testing techniques, investment in state-of-the-art inspection equipment and global technical collaboration.
Read more...
ABB leads in emissions monitoring with industry-first data acquisition system proficiency test
ABB South Africa
Analytical Instrumentation & Environmental Monitoring
ABB is the first company to offer a complete package of continuous gas analysis and DAHS systems fully compliant with international standards.
Read more...
Ensuring clean and safe water
Endress+Hauser South Africa
Editor's Choice Analytical Instrumentation & Environmental Monitoring
Endress+Hauser’s comprehensive range of disinfection sensors is designed to monitor and control disinfectant levels in water treatment processes.
Read more...
High-precision measurement of insulating gases
WIKA Instruments
Analytical Instrumentation & Environmental Monitoring
WIKA has launched the next generation of its GA11 gas analyser. It enables switchgear operators, manufacturers and maintenance companies to record the quality of SF6 gas and alternative insulating gases.
Read more...
Say goodbye to missed contamination with real-time colour monitoring
Analytical Instrumentation & Environmental Monitoring
Applied Analytics offers seamless and rapid colour monitoring in processes with an industry-proven analyser that quickly and accurately monitors colour in your sample stream for impurities and inconsistencies.
Read more...
Metrology laboratory is the heart of data-driven production consistency
Analytical Instrumentation & Environmental Monitoring
Pressing and welding have been at the core of Tier 1 automotive supplier, Malben Engineering for 50 years; but it is the company’s investment in its state-of-the-art metrology laboratory which has set it apart.
Read more...
Unlocking precision: The future of inline concentration measurement
Analytical Instrumentation & Environmental Monitoring
[Sponsored] In today’s resource-conscious industrial world, manufacturers are under growing pressure to optimise productivity, ensure consistent product quality and minimise waste. One of the most effective levers for achieving these goals lies in mastering concentration measurement, and Anton Paar is redefining how it is done.
Read more...
printer friendly version