Portable flue gas oxygen analyser for optimising burn mixture
April 2004
Analytical Instrumentation & Environmental Monitoring
Safe and economic combustion of gas and fuel oils relies on the correct ratio of fuel and air being provided to the burner. The traditional method to achieve this was very subjective, as it relied on the commissioning engineer's skill and experience for 'reading' the flame. The telltale colour would indicate whether or not the flame was burning on or off ratio.
A more accurate method, which did not rely on the engineer to make the decision, is to use an oxygen analyser in the flue gas. This can be a permanent installation - but more often than not, the flue gas can be analysed by a handheld device, which is used to set up the burner initially and then on periodic maintenance occasions, to check that nothing has changed in the meantime.
North American, a world-class manufacturer and supplier of combustion equipment, has an analyser, which is both easy and economical to use. Weighing under 500 g, it is portable and is powered by four AA batteries. The 8108 is accurate to ±0,2% and is equipped with a self draining water trap to preserve the oxygen cell. It uses no messy and expensive chemicals and has a re-usable sponge filter. It also has a low battery light and a calibration knob for quick and easy calibration. Supplied in a protective case with batteries and extension tubing, it is ready for use.
Operation consists of inserting the stainless steel probe into a prepared hole on the flue stack or duct and pressing the start button. The sample is automatically taken and the results displayed on the easy to read digital display. Continuous sampling and reading is also possible.
Further reading:
Ensuring clean and safe water
Endress+Hauser South Africa
Editor's Choice Analytical Instrumentation & Environmental Monitoring
Endress+Hauser’s comprehensive range of disinfection sensors is designed to monitor and control disinfectant levels in water treatment processes.
Read more...
High-precision measurement of insulating gases
WIKA Instruments
Analytical Instrumentation & Environmental Monitoring
WIKA has launched the next generation of its GA11 gas analyser. It enables switchgear operators, manufacturers and maintenance companies to record the quality of SF6 gas and alternative insulating gases.
Read more...
Say goodbye to missed contamination with real-time colour monitoring
Analytical Instrumentation & Environmental Monitoring
Applied Analytics offers seamless and rapid colour monitoring in processes with an industry-proven analyser that quickly and accurately monitors colour in your sample stream for impurities and inconsistencies.
Read more...
Metrology laboratory is the heart of data-driven production consistency
Analytical Instrumentation & Environmental Monitoring
Pressing and welding have been at the core of Tier 1 automotive supplier, Malben Engineering for 50 years; but it is the company’s investment in its state-of-the-art metrology laboratory which has set it apart.
Read more...
Unlocking precision: The future of inline concentration measurement
Analytical Instrumentation & Environmental Monitoring
[Sponsored] In today’s resource-conscious industrial world, manufacturers are under growing pressure to optimise productivity, ensure consistent product quality and minimise waste. One of the most effective levers for achieving these goals lies in mastering concentration measurement, and Anton Paar is redefining how it is done.
Read more...
High-precision measurement of insulating gases
WIKA Instruments
Analytical Instrumentation & Environmental Monitoring
WIKA has launched the next generation of its GA11 gas analyser. It enables switchgear operators, manufacturers and maintenance companies to record the quality of SF6 gas and alternative insulating gases.
Read more...
Smart sensors for cleaner, safer food and beverage processes
Instek Control
Analytical Instrumentation & Environmental Monitoring
Instek Control specialises in advanced measurement solutions tailored for the food, beverage, pharmaceutical and mining industries. Among the company’s offerings are advanced process sensors from Anderson-Negele, as well as ALVIM biofilm monitoring technology.
Read more...
Elevating mining separation processes through precision instrumentation
Endress+Hauser South Africa
Analytical Instrumentation & Environmental Monitoring
In mining operations, the quest for efficiency and productivity is key. There is an urgent need for innovative solutions to enhance the performance of extraction processes while balancing operational costs and environmental impact.
Read more...
Alfa Laval launches next generation
Analytical Instrumentation & Environmental Monitoring
Alfa Laval has launched Clariot, a next generation, AI-based condition monitoring solution, precision-built for hygienic process equipment to deliver more accurate analysis and support.
Read more...
The next generation in metal sorting
Mecosa
Analytical Instrumentation & Environmental Monitoring
In the metal recycling industry, companies are increasingly challenged to not only improve the efficiency of their processes but also to raise the quality and purity of the sorted materials to new levels. By integrating proven spectral analysis technology into its market-leading REDWAVE XRF sorting system, REDWAVE is unlocking new opportunities for metal recycling, particularly in aluminium recovery.
Read more...
printer friendly version