AS-i four-channel analog modules with 'plug-and-play'

December 2003 Fieldbus & Industrial Networking

The new AS-i Smartline and Classic 4 Channel Analog modules from IFM Electronic enable connection to an AS-i master according to the 2.1 specification by simple 'plug-and-play'. The analog values can be transmitted without further software as all the required handling is done by the master's firmware.

The slaves are connected to the AS-i interface via the classic Combicon connectors with IP20 protection and via a conventional base for the IP67 modules. Sensors and actuators are connected by means of one connector per analog channel to allow easy replacement of individual peripheral units. Powerful LEDs on the front panel indicate the state of the analog channels, voltage supply and any possible module faults. The analog slaves support the new AS-i functions of peripheral fault and communication error detection.

An analog slave is identified by its profile, then master and slave automatically start the data exchange. There is no need to program special function blocks to control and handle the analog protocol. The values of the PT100 temperature module are transmitted directly in the physical unit °C, so they are available without further conversion. Addressing is done before mounting via the adapter integrated in the addressing unit or after mounting by means of a module with addressing socket and addressing cable with a jack plug.

All standard units with 0 or 4 to 20 mA or 0 to 10 V can be connected to the universal analog slaves. For small loads, the current supply is directly taken from the yellow flat cable, or if a greater current is required, it can be supplied from an external 24 V source.

For more information contact Andrew Kerr, Shorrock Automation, 012 345 4449, [email protected], www.shorrock.co.za

Further reading:

EtherCAT interoperability removes industrial networking barriers
Fieldbus & Industrial Networking
Selecting the right communication technology is one of the most important decisions engineers make, and interoperability helps with that decision. Key development tools and standards ensure interoperability among many EtherCAT devices and manufacturers.

Read more...

---

Condition monitoring to go
Turck Banner Southern Africa Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.

Read more...

---

EtherCAT terminals for the connection of load cells
Beckhoff Automation Fieldbus & Industrial Networking
Beckhoff is offering a compact and cost-effective solution for integrating weighing functions into control systems. The integration of the supply voltage for the load cells is particularly advantageous.

Read more...

---

Affordable building management system product range
Fieldbus & Industrial Networking
Schneider Electric has unveiled its EasyLogic Building Management System range, designed for basic building architectures, to the local marketplace. This is a complete and cost-effective range of field controllers and sensors that are both easy to install and scalable.

Read more...

---

Flexible EtherCAT communication interface for DALI-2
Beckhoff Automation Fieldbus & Industrial Networking
The EL6821 EtherCAT Terminal from Beckhoff allows up to 64 DALI/DALI-2 slaves and 64 DALI-2 input devices to be connected. The TwinCAT 3 System Manager makes it easy to configure and parameterise DALI devices flexibly.

Read more...

---

EtherCAT-based control technology for building automation
Beckhoff Automation Fieldbus & Industrial Networking
Modern non-residential buildings place many high demands on building automation. This can be optimally implemented with EtherCAT-based control technology from Beckhoff, which provides an efficient central automation architecture thanks to ultra-fast data communication.

Read more...

---

PC-based control for university studies
Beckhoff Automation Fieldbus & Industrial Networking
The IDEA box developed at Heilbronn University of Applied Sciences is designed to introduce students to the topic of Industry 4.0 in a simple and practical way. At the core of the corresponding demo case is PC-based control from Beckhoff.

Read more...

---

A new standard in high-speed Ethernet communication
Fieldbus & Industrial Networking
The TXMC897 module from TEWS Technologies supports a range of Ethernet standards and speeds, making it suitable for diverse applications, including the defence, industrial, and IIoT markets.

Read more...

---

Data-driven battery production
Turck Banner Southern Africa Fieldbus & Industrial Networking
The availability of high-performance batteries at moderate prices is one of the most important factors for the success of electromobility. As a long-standing automation partner to the automotive industry, Turck Banner supports the major battery manufacturers with its know-how.

Read more...

---

Bring critical temperature data to your condition monitoring system
Turck Banner Southern Africa Fieldbus & Industrial Networking
Data conversion just got easier. Turck Banner converters are compact, simple add-ons that seamlessly fit into your factory applications. You can take various types of signals such as discrete, analogue and many others, and convert them to protocols like IO-link, PICK-IQ, PWM/PFM, and Modbus.

Read more...

---