Maintenance, Test & Measurement, Calibration

Pneumatic test pump kit

November 2018 Maintenance, Test & Measurement, Calibration

Fluke Calibration now offers the 700HPPK Pneumatic Test Pump Kit, a rugged, portable tool that generates and adjusts pneumatic pressures up to 21 MPa without requiring a nitrogen bottle or other external pressure supplies. It is ideal for generating high pressure in the field to devices under test (DUTs) such as transmitters, controllers and analog gauges.

The unit reaches pressure in 20 seconds and a detachable pressure adjustment system allows technicians to make fine pressure adjustments to 0,05% of reading, or better.

The lightweight and portable pneumatic pressure kit is designed for use in the laboratory or the field, with collapsible feet and a built-in handhold making it portable. Inline filter and desiccant systems protect the device against contamination from the DUT and it works on almost any surface, so technicians do not need a laboratory bench or flat area in the field.

The 700HPPK has the versatility to cover a wide range of workloads. It features a 2-metre pressure line and assorted pressure fittings to connect to a variety of DUTs for wide workload coverage. Its ¼ NPT female reference gauge connector facilitates easy reference gauge switching. No extra tools are required, reducing the equipment and accessories technicians need to carry to the job site. The calibration manifold attaches and detaches smoothly via quick detent pins that reduce setup and pack-up time. A second model, the 700HPP, is available specifically for high pressure source users.

For more information on Fluke Calibration 700HPPK Pneumatic Test Pump Kit, or for info about seminars, demos or to locate the nearest dealer, contact Comtest on +27 10 595 1821 or

For more information contact Comtest, +27 10 595 1821,,


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Electrical loggers for energy savings
October 2020, Comtest , Electrical Power & Protection
Fluke energy loggers deliver a complete picture to reduce energy costs and improve the bottom line.

The Fluke T6 with FieldSense technology
October 2020, Comtest , Maintenance, Test & Measurement, Calibration
FieldSense technology works by providing a capacitive path from a contact point on the back of the tester and the operator’s hand to earth ground.

Preventive maintenance in pulp and paper mills
October 2020, R&C Instrumentation , Maintenance, Test & Measurement, Calibration
The thinking around machine condition monitoring has changed over the years and it is now stated that vibration is the better measurement over temperature, since it gives earlier warning.

Leak detection has never been quicker and easier
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
SKF’s TKSU 10 ultrasonic leak detector is able to identify leakages in compressed air and vacuum systems, delivering substantial savings for end-users by reducing inspection time and minimising energy costs.

Best practices in measurement
September 2020, Yokogawa South Africa , Maintenance, Test & Measurement, Calibration
Operating envelopes are changing and the impact of these changes on instrumentation must not be underestimated. Instrumentation with a design rating of a particular capacity is heavily stressed when the load is increased.

Internal inspection of machinery
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
The TKES 10 Endoscope Series from SKF is designed for fast, easy internal inspection of machinery, delivering significant savings in terms of both time and money to customers and end-users.

Parker releases new software tool
September 2020, Parker Hannifin - Sales Company South Africa , Maintenance, Test & Measurement, Calibration
IQANgo enables service technicians or machine owners to connect wirelessly to modules in their machines, allowing them to perform a broad range of actions such as system status checks and troubleshooting errors or alarms.

Condition monitoring solutions from Turck Banner
September 2020, Turck Banner , Maintenance, Test & Measurement, Calibration
Turck Banner’s retrofit solution can be used in industrial plants that do not yet fully support Industry 4.0 sensor-based condition monitoring. Machines can easily be monitored by customised systems, with data transmitted via wireless networks if required.

Detect compressed air, steam, gas and vacuum leaks
September 2020, Comtest , Maintenance, Test & Measurement, Calibration
Comtest has introduced the Fluke ii900, a handheld sonic industrial imager that enables maintenance to quickly locate air, steam, gas and vacuum leaks in compressed air systems. The straightforward, intuitive ...

Comtest announces Microchip rebrand
August 2020, Comtest , News
Microchip Technology Incorporated (Microchip) is the result of a rebranding of Microsemi, represented in South Africa by Comtest. Microchip is a leading provider of embedded control and system solutions, ...