Mobile app and vibration sensor allow collection of expert data
September 2016Maintenance, Test & Measurement, Calibration
SKF has introduced a solution to help non-expert staff gather critical data. SKF Enlight is a platform that combines a mobile app, special sensor and, if appropriate, intrinsically safe hardware to allow fast, simple gathering of data from machinery.
There are three elements to SKF Enlight, the first of which – Data Collect – is an app that turns a smartphone or tablet into a data collection device. Data can be sent directly to the SKF cloud, for expert analysis by the global SKF Remote Diagnostic Centre (RDC) network. The second key element is the SKF wireless machine condition detector (WMCD), a special sensor that measures vibration and temperature data and relays it to Data Collect via Bluetooth. Finally, the third element is purpose built Atex Zone 1 compliant tablets and smartphones, for users who need to collect data in hazardous areas.
“The app is extremely simple to use, allowing non-vibration experts to collect expert data,” says Christoffer Malm, head of Connectivity Room at SKF. “The user is only one button push away from RDC experts, who use their extensive knowledge to provide detailed analysis of a machine’s condition and provide recommendations to rectify faults.”
The WMCD sensor, mounted magnetically to a machine, measures vibration and temperature data. This is then sent to the app for visualisation. Vibration levels are benchmarked against ISO standards and the user sees the assessment as a simple ‘traffic light’ (red, amber or green) indicator.
In addition, the WMCD takes a simultaneous measurement of the bearing’s condition using patented SKF algorithms to assess the severity of damage and wear. Again, results are displayed in traffic light format. In the event of a warning or alert in any of the measured parameters, the user can request an ‘On Demand Diagnostic’ directly from the measurement screen. Collected data is sent wirelessly to an SKF RDC, where a vibration expert can analyse the data and send a report as to the cause of the high vibration directly to the users email account.
Dedicated vibration analysers require a high level of competence, and are expensive for one-off measurements. SKF Enlight provides low-cost, easy to use instrumentation, with instant connection to SKF expertise through its RDC network. It will help users carry out vibration monitoring in a way not currently fulfilled by systems such as route-based or dedicated high-end analysers. Manufacturing facilities and repair shops are likely to be the first beneficiaries.
Automatic lubrication systems drive mobile mine machine reliability and uptime SKF South Africa
Maintenance, Test & Measurement, Calibration
SKF’s Lincoln P203 progressive lubrication systems are improving reliability and uptime on mobile machines at a Zambian gold mine, with installation of 45 units completing by October 2026.
Read more...Nitration: the acid you didn’t see coming Wearcheck
Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.
Read more...KSB makes mechanical seals for its own pumps and other brands
Maintenance, Test & Measurement, Calibration
KSB Pumps and Valves is expanding its range of mechanical seals to fit its own pumps and competitor brands. The portfolio covers component and cartridge seals, API 682-compliant systems, slurry and high-pressure seals, and ATEX-certified solutions, supported by refurbishment and field service capabilities.
Read more...Omniflex delivers ICCP systems in London Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied impressed current cathodic protection systems for landmark London buildings, protecting reinforced concrete from corrosion and extending the service life of commercial, retail and heritage sites.
Read more...Modernising acid cooler protection without disrupting production Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied an advanced anodic protection control system to phosphate producer Foskor, replacing a legacy transformer rectifier system while maintaining uninterrupted production. The distributed PowerView CP solution provides remote monitoring and DCS integration.
Read more...Engineering partnership delivers longer life for vibrating feeders in mining
Maintenance, Test & Measurement, Calibration
OST-Africa’s combination of VISAM vibrating motors and advanced rubber mounting technology has helped Euro Sales achieve a 30 to 40% increase in component life on vibrating feeders at several major mining operations, with zero mount failures in the first 12 months.
Read more...When oil can’t take the heat Wearcheck
Maintenance, Test & Measurement, Calibration
Unlike the slow ageing of oxidation, thermal breakdown is the sudden chemical collapse of a lubricant under excessive heat. Steven Lumley of WearCheck explains how it happens, where it strikes, and how oil analysis detects it.
Read more...Mini data loggers for temperature and humidity monitoring
Maintenance, Test & Measurement, Calibration
Testo’s range of four compact data loggers covers temperature and humidity monitoring for storage, refrigeration and transport applications, with USB-C or Bluetooth connectivity and capacity for up to 16 000 readings.
Read more...Alternative fuels for cutting, brazing, soldering and heating
Maintenance, Test & Measurement, Calibration
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version