Leuze has engineered its CML 700i light curtains to be used in applications with temperatures down to -30°C. An important bonus is the integrated Profibus interface offered with this high-tech sensor.
The intelligent fastening concept includes an optional plug outlet at the rear, allowing this new light curtain to be easily integrated into most operations. Use of these specially developed devices allows mounting without detection gaps very close to the operational (transport) system.
The plug design facilitates use of the light curtains in a cascaded configuration, which is especially useful if measurement lengths of greater than three metres are required. An integrated alignment mode and visible display of the received signal level simplify and accelerate alignment.
With the extremely rapid response time of 10 microseconds per beam, even very fast processes can be detected and the measurement data recorded. In addition, the ability to detect transparent media increases process reliability in many applications.
Together with integrated interfaces for Profibus, the Leuze CML 700i light curtains also interface with CAN bus, RS-485 and I/O-Link. The data can also be transmitted via analogue outputs, whereby both the control unit as well as the interfaces are housed in the receiver which means that additional devices such as gateways do not need to be mounted.
Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...PDS implementation on mines
Sensors & Transducers
Level 9 vehicle intervention for collision avoidance has been mandatory on South African mines since 2022, yet the effective roll-out of proximity detection systems remains slower than expected. This is not due to the technical limitations of integration but to operational readiness on site.
Read more...Monitoring analogue process values ifm - South Africa
Sensors & Transducers
Everywhere in industry, electronic sensors are used to detect process values such as temperature, pressure or flow. Process value monitoring often takes place directly in the sensor.
Read more...Protecting buildings’ embodied carbon with retrofitted systems Schneider Electric South Africa
Sensors & Transducers
The World Economic Forum has said that around 80% of the buildings in existence will still be around in 2050; it is therefore essential that in order to combat climate change we retrofit them for energy efficiency.
Read more...Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...Enhancing gold leaching efficiency Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser offers a range of advanced technologies designed to enhance the stability and accuracy of pH and dissolved oxygen measurements on gold processing plants.
Read more...Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.
Read more...The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.
Read more...Telco Sensors for blocked or empty chute detection
Sensors & Transducers
In most industries there is a problem with photoelectric sensors as highly contaminated environments make it difficult to operate and sense reliably. Telco Sensors overcomes this through its powerful high-performance infrared sensors that ensure penetration of harsh pollution to guarantee reliable detection.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version