Pinpoint cable faults with accuracy and ease
September 2012
Maintenance, Test & Measurement, Calibration
Fast, convenient and reliable location of faults on underground power cables is offered by the new MPP2000 pinpointer from Megger. This compact handheld instrument is supplied with a combined lightweight microphone and electromagnetic probe. It incorporates a large backlit colour display that not only shows magnetic and acoustic signal levels but also the relative distance and direction to the fault.
Used in conjunction with a high voltage surge generator such as Megger’s PFL22M1500 to create a flashover at the point of the fault, the pinpointer detects both the electromagnetic and acoustic signals produced by the flashover. The instrument evaluates the time difference between these signals and uses this to determine the relative distance to the fault, thereby eliminating the misleading results that are often produced by instruments that rely on signal strength alone.
The pinpointer incorporates two electromagnetic signal level indicators, allowing it to provide information not only about the direction to the fault, but also the actual route of the cable. Also provided is a bright LED indicator that gives instant confirmation that an electromagnetic signal has been detected, even if there is no acoustic signal present.
To ensure reliable operation even in the most difficult applications, the MPP2000 uses a lightweight ground microphone with an integral windshield, and it is supplied with headphones. User-adjustable bandpass filtering is also provided for enhanced background noise suppression.
It has an operating temperature range of -20 to +50°C and is housed in a lightweight ergonomic case with an IP54 protection rating, making it suitable for use outdoors in even the most demanding of weather conditions. An adjustable neck strap allows it to be carried easily, hands-free. The combined electromagnetic probe and ground microphone is also lightweight yet tough, and can be disassembled for easy transportation and storage.
For more information contact Stuart Ashton, Surgetek, +27 (0)11 792 1303, [email protected], www.surgetek.co.za
Further reading:
Oils don’t die, they degrade
Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck explores the main ways lubricants degrade in service and how these degradation modes affect oil performance and machine reliability.
Read more...
Real-time spectrum analyser
Vepac Electronics
Maintenance, Test & Measurement, Calibration
The PXE series real-time spectrum analyser covers frequencies up to 20 GHz with a 100 MHz analytical bandwidth and ultra-fast sweep speed, supporting spectrum monitoring, interference finding and RF test and measurement functions.
Read more...
Preserving a French heritage landmark
Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex supplied a remotely monitored impressed current cathodic protection system for the Perret Tower in Grenoble, a protected French heritage site, combining 24/7 corrosion protection with integrated surge protection against lightning strikes.
Read more...
Operational efficiencies and safety compliance with preventive maintenance programmes
Maintenance, Test & Measurement, Calibration
Konecranes explains how its Lifecycle Care Preventive Maintenance programme reduces unexpected downtime, improves safety compliance and delivers measurable financial benefits for operators of cranes and lifting equipment across any make or sector.
Read more...
Portable appliance tester
Vepac Electronics
Maintenance, Test & Measurement, Calibration
Vepac Electronics’ new portable appliance tester enables precise safety testing of electrical appliances in accordance with DGUV regulation 3 and BetrSichV, with simple three-button operation and battery-powered mobility.
Read more...
Why lubrication fails in mining and what to do about it
Maintenance, Test & Measurement, Calibration
Lubrication Engineers explains the recurring failure points behind mining lubrication problems and how the right product, storage and application practices can improve equipment reliability.
Read more...
When digital twins move from concept to critical tool
IT in Manufacturing System Integration & Control Systems Design Maintenance, Test & Measurement, Calibration
Digital twins are moving out of the lab and onto the mine, the factory floor and the transport network where they predict failures before they happen. Amritesh Anand looks at where they earn their keep, the data and integration work behind them, and the security questions every organisation should ask before switching one on.
Read more...
Why asset level intelligence is now essential for resilient wastewater plants
Schneider Electric South Africa
Maintenance, Test & Measurement, Calibration
Sub-Saharan Africa’s wastewater operators face mounting pressure to keep ageing plants running smoothly and meet tougher environmental standards, all while lacking visibility into the health of their medium-voltage (MV) drives and other critical rotating assets. Adding predictive analytics, digital twins and enterprise dashboards enables optimisation across multiple sites, ensuring every drop moves safely and efficiently through the water cycle.
Read more...
How multiple boilers can minimise costly downtime
Maintenance, Test & Measurement, Calibration
Associated Energy Services explains how multi-boiler systems reduce downtime risk for South African manufacturers, covering redundancy planning, fuel source diversification and the strategic management of backup boiler capacity.
Read more...
Field calibration made easy
Instrotech
Maintenance, Test & Measurement, Calibration
Instrotech’s locally designed and manufactured Calog calibrator range feature a rugged IP54-rated housing, backlit display with data logging via SD card, and a lithium-ion battery with approximately eight hours of run time.
Read more...
printer friendly version