January 2020Analytical Instrumentation & Environmental Monitoring
In order to monitor the process of reverse osmosis and ensure that deposits do not clog up membranes and reduce system efficiency, Martens, a member of the GHM Group, has joined the forces with its Condix 4623 digital 4-electrode conductivity converter and the GHM-ONE multi-function HMI controller.
The conductivity device detects whether the untreated water is unsuitable for operation in the system, whilst the multi-function device provides the measurements to the superordinate PLC via a Profinet fieldbus, where it is easily integrated by means of a GSDNL device description file.
Reverse osmosis does not only produce the permeate that is the filtered raw water, it also produces retentate, a concentrate that is unable to pass the membrane. It is an effect that can reduce the efficiency of the system and result in damage if the scaling effect of dissolved contents exceeds the solubility limit and deposits accumulate. An over-saturation of calcium carbonate must also be prevented.
In order to counteract both of these effects, an antiscalent is added to reduce the precipitation level and the water to be treated is adjusted to an acidic level in order to prevent oversaturation with calcium carbonate.
Jan Grobler, managing director of GHM Messtechnik South Africa says, “The pH value at this point is the measured variable for the correct dosing. The objective is to minimise the use of additives with maximum filter effect. The development of ammonia, which is toxic for fish, must be avoided. The concentration increases and decreases analogously to the prevailing pH value, therefore, the pH value is monitored in the process input and upstream from the discharge and conditioned as necessary.
“The combination of the Condix 4263 and the GHM-ONE multi-function controller offers a superior analysis technology specifically for process water monitoring in order to prevent membrane clogging and system under performance. Accurate analysis protects the material of the system from undesired deposits that require cleaning with the benefits of reduced downtime and increased productivity.”
The relevant results are visualised by the GHM-ONE, which is connected to the measuring probes via RS-485 (Modbus RTU) and the measured values can be read at any time on its display, so that conclusions can be made about the system status throughout the entire process cycle.
Matching HVAC to the real demands of buildings and processes
Analytical Instrumentation & Environmental Monitoring
Industrial Climate Engineering director, Alin Gomes explains why effective HVAC goes beyond specifying equipment on capacity, covering load profiling, ventilation requirements, heat recovery and turnkey delivery for specialised manufacturing and processing environments.
Read more...How SCE approaches sensor selection for critical environments Specialised Climate Engineering
Analytical Instrumentation & Environmental Monitoring
Specifying the right sensor for a critical climate involves far more than matching a datasheet accuracy figure. As an authorised Vaisala HVAC partner, SCE explains how understanding the environment, the measurement purpose and sensor placement determines effective climate control.
Read more...Changing gas quality calls for smarter combustion control
Analytical Instrumentation & Environmental Monitoring
As South Africa prepares for a transition from declining Mozambican natural gas to a proposed methane-rich bridge, LNG, industrial users can no longer assume a constant Wobbe Index and calorific value. The compact RMG RGQ 5 provides fast, plant-level gas-quality data to support approved burner and engine settings.
Read more...Getting the chemistry right
Analytical Instrumentation & Environmental Monitoring
Grace’s European production site has relied on analogue compression load cells from Minebea Intec for decades, with the long-proven measurement concept now serving as the reference for new silo projects as the company expands its capacity.
Read more...Why mining operations need local lightning early warning Senseca
Editor's Choice Electrical Power & Protection
Lightning can develop into a serious mining hazard before the first local strike, leaving crews little time to stop work and reach safety. Local early-warning technology can provide valuable lead time, allowing mines to connect developing storm conditions to defined trigger actions that protect people, explosives and equipment.
Read more...Why measurement matters in smelting Endress+Hauser South Africa
Analytical Instrumentation & Environmental Monitoring
South African smelters returning to operation after energy constraints face new demands for tighter control, better visibility and environmental compliance. Endress+Hauser explains how modern measurement technology supports safer, more efficient furnace operation and local beneficiation.
Read more...Sun tracking with pinpoint precision Senseca
Analytical Instrumentation & Environmental Monitoring
Senseca has introduced the SEMS-2000 solar energy measurement system, a 2-axis solar tracker with pinpoint sun-pointing accuracy that automatically monitors direct, global and diffuse irradiance for unattended outdoor solar installations.
Read more...AMETEK expands 993X gas analyser series with explosion-proof enclosures
Analytical Instrumentation & Environmental Monitoring
AMETEK Process Instruments has added ATEX and IECEx Zone 1-certified explosion-proof enclosures to its 993X series of gas analysers, enabling reliable installation in Zone 1 hazardous locations where purge gas is unavailable.
Read more...Why medical device leak testing matters for South Africa's MedTech future ATEQ South Africa
Analytical Instrumentation & Environmental Monitoring
As South Africa works to grow local medical technology manufacturing, non-destructive leak and flow testing is becoming a strategic quality assurance tool, helping manufacturers verify device integrity, meet regulatory requirements and improve production efficiency.
Read more...Moving forward with reverse osmosis
Analytical Instrumentation & Environmental Monitoring
Rising water costs and pressure on infrastructure are changing the way industries view reverse osmosis. G-Chem Aquacare is developing tailored, containerised solutions that make the technology more accessible for South African industry.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version