SAIMC


SAIMC: Richards Bay branch

January 2014 SAIMC

November Technology Evening

Farai Pasipamire (left) thanks Greg Smook after the presentation.
Farai Pasipamire (left) thanks Greg Smook after the presentation.

The November Technology Evening was hosted by Pulse Control Systems and presented by Greg Smook, product manager for Siemens level measurement products, on the topic ‘Selection and installation of level transmitters’. The vast majority of level transmitters installed today operate on the principle of either ultrasonic or radar technology and Greg presented the topic based on these two technologies.

He gave a comparison of the two technologies based on their strengths and weaknesses and explained the effects parameters such as temperature, foam, noise, pressure, vacuum, dust, SG and the measured material will have on each technology. He also explained the advantages and disadvantages of ultrasonic versus radar technology. This was followed by some good practice guidelines to be followed when choosing a level transmitter, how one should decide which technology to use and the right location to install it. Many problems result from the improper installation and location of the transmitter.

The Siemens and Pulse Control Systems teams were present and the branch would like to thank Nimelen Pillay and Pulse Control Systems for sponsoring and arranging the Technology Evening, and Greg Smook for a good presentation.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SAIMC Zambia
SAIMC SAIMC News
SAIMC Zambia marked its 21st anniversary with the annual SAIMC Banquet, held on 29 November 2025 at Mukwa Lodge in Kitwe, Zambia.

Read more...
SAIMC: From the office of the COO: Reflections on progress and ambitions for the new year
SAIMC SAIMC
As we greet the possibilities of the new year, we have the chance to reflect on our shared journey, to acknowledge our achievements and to set our sights on new horizons.

Read more...
SAIMC: Durban branch
SAIMC SAIMC
The SAIMC Durban Branch closed off its 2025 technology meetings with an exceptionally well-attended session on selecting and applying signal transducers.

Read more...
SAIMC: Durban year-end dinner
SAIMC SAIMC
The SAIMC Durban branch hosted its much-anticipated annual year-end dinner at the Mount Edgecombe Country Club on 22 November 2025. Durban’s summer weather provided the perfect backdrop for a warm, ...

Read more...
Durban branch
SAIMC
At the Durban branch of the SAIMC held in October, Mitch Naidoo took the attendees on an interesting journey on Asset Health Management: Tracking The Pulse Of Your Plant.

Read more...
From the office of the COO: Aligning people, process and technology for global competitiveness
SAIMC SAIMC
As I reflect on the recent SAIMC User Advisory Conference where we gathered to discuss the future of industrial technology, integration and the evolving role of engineering professionals in South Africa ...

Read more...
SAIMC: Durban branch
SAIMC SAIMC
At the Durban branch of the SAIMC held in October, Mitch Naidoo took the attendees on an interesting journey on Asset Health Management: Tracking The Pulse Of Your Plant.

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
The SAIMC Johannesburg Branch technical evening was hosted by Proconics Advanced Solutions. The topic of the session was ‘Turning Big 3D Data into Actionable Engineering Insights – Challenges and Smart Solutions’.

Read more...
SAIMC User Advisory Council Annual Summit 2025
SAIMC SAIMC
October 2025 marked a pivotal moment for the South African automation and manufacturing community as the SAIMC User Advisory Council hosted its first annual summit under the SAIMC banner.

Read more...
SAIMC: Johannesburg
SAIMC
The Johannesburg Branch of the SAIMC hosted a successful Technology Evening on 10 September. The event was well attended and generously sponsored by Phoenix Contact.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved