SAIMC


SAIMC: Vaal branch

November 2012 SAIMC

The Vaal branch continues on its quest to break new ground. On 6 September it organised a successful tour of the Sedibeng brewery, popularly known by its flagship brand of Heineken. Despite the heavy rains that pounded most of south Gauteng on that day, there was a good turnout for both the plant visit and the technology meeting that followed that evening.

The group at Sedibeng brewery.
The group at Sedibeng brewery.

The brewery tour was the first highlight in a series of events lined up on the Vaal branch calendar. Having been postponed in June, the big day finally arrived and what an informative experience it was for the group. Our hostess for the day, Busisiwe Mabuse made light work of the task at hand and was excellent at providing us with process related information.

She took us around the plant, explaining every stage of the brewing process. We also had the chance to meet the production manager who took the time to answer all technical questions that arose from the group. Due to safety reasons our movements were restricted to walk ways, the non-accessible areas were shown to us on strategically located video monitors. The plant has a state-of-the-art instrumentation and control system and the bottling plant gives one the opportunity to witness high precision technology at work.

So from the delivery of malt and hops to the storage of bottled beer in the warehouse ready for dispatch, the group was able to witness the making of some of the finest beer in the country. At the end of the tour, Solly Mabitsela thanked the hostess and the company for giving us this golden opportunity to visit the plant.

Technology evening

In the evening back at our venue, Andre van Schalkwyk from Aveng Grinaker LTA Instruments presented on level measurement using differential pressure principles. Ever struggled with the installation of capillary tubing using a cat ladder? Well, this system has the advantages of easy installation, reduced inventory and improved response time. This new technology, the Rosemount Electronic Remote Seals (3051S ERS) utilises two pressure sensors, a primary and secondary which are connected via two wire HART architecture for power and signal transmission. The secondary transmitter shares its pressure readings with the primary which is programmed to do calculations to give level measurement readings. The use of this technology could however be limited due to some harsh plant conditions and the cost factor. Whether these transmitters could be linked wirelessly at reasonable cost is the subject of ongoing research. So far we have to be content with using a cable to link the two transmitters, as it also provides power to the secondary one.

Solly Mabitsela (l) thanks Andre van Schalkwyk after the presentation.
Solly Mabitsela (l) thanks Andre van Schalkwyk after the presentation.

The next big event by the calendar is the Golf Day planned for 23 November. Please help us make a success of this day.

The Vaal branch of the SAIMC will be holding a golf day on Friday 23 November 2012 at the Riviera Hotel & Country Club.

A four ball costs R1600 and a watering hole sponsorship will cost R600.

For further information and bookings please contact Hendie Grobbelaar – [email protected] or call her on 083 455 3291.

Or you may contact:

Solly Mabitsela (SAIMC Vaal Branch chairman), +27 83 381 9962, [email protected]

Eben Grobbelaar (SAIMC Vaal Branch vice chairman), +27 83 405 0654, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

International robotics conference streams live to Africa
SAIMC
The SAIMC hosted five live-stream viewing events across South Africa for the IEEE International Conference of Robotics and Automation in Vienna, bringing global robotics research and technology directly to local industry and academia.

Read more...
From the office of the CEO: Introduction to GRIP
SAIMC SAIMC
Industry has long been concerned about graduates who have no understanding of the modern equipment they will face in industry. This has triggered an investigation into the possibility of creating a facility whereby graduates register with the SAIMC and rotate through all the vendors to obtain experience on modern equipment.

Read more...
SAIMC: Durban branch
SAIMC SAIMC
The SAIMC Durban Branch hosted a technology meeting featuring a presentation by Abacus Automation on the practical role of AI in industrial automation, drawing considerable interest from attendees.

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
Instrotech recently hosted a technical presentation on load cell technology and applications at the SAIMC Johannesburg Technology Evening, presented by Trevor Salzwedel. The session covered load cell fundamentals, selection and installation, mechanical considerations and calibration methods.

Read more...
SAIMC: Johannesburg Golf Day
SAIMC SAIMC
The SAIMC Johannesburg Golf Day on 22 May 2026 brought together 16 four-balls for a day of golf, networking and fundraising, with generous support from sponsors across the instrumentation and control sector.

Read more...
SAIMC to exhibit at Electra Mining Africa 2026
SAIMC SAIMC
The SAIMC International INSPIRE Conference 2026 will be held on 14 and 15 October 2026

Read more...
SAIMC’s International INSPIRE Conference
SAIMC SAIMC
The SAIMC International INSPIRE Conference 2026 will be held on 14 and 15 October 2026.

Read more...
Knowledge Sharing for Industry: SAIMC’s June 2026 event
SAIMC SAIMC
SAIMC will host a technical presentation focused on an important challenge facing modern industry, tracking and tracing across increasingly complex supply chains.

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
The Johannesburg Branch had the privilege of being hosted by Phoenix Contact for our technology event in May. Shamil Surbun, BU manager for Automation, presented a CPD-accredited session on ‘From Sensor to Cloud: How SPE and APL Are Transforming Industrial Connectivity’.

Read more...
From the office of the CEO: Power Hour goes national
SAIMC SAIMC
South Africa’s automation, control, mechatronics and computer engineering community is changing fast, and the SAIMC is changing with it. I am excited to announce a new national initiative that will reshape how we deliver technical knowledge, strengthen branch identity and bring our community together like never before.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved