The eCap is a precise and fast universal power and net quality meter for applications with high accuracy. It measures voltages, currents, power, power factor, energy, frequency, and total harmonic distortion with all harmonics up to the 20th, and allows fully galvanically isolated transmission via the integrated Modbus RTU/RS485 interface. The required Modbus addresses for the measured values are listed in a separate Modbus register address document available on the website along with the eCap product.
A single digital input and two digital outputs can be read, and both outputs can be separately written via the Modbus RTU interface. All communication parameters may be set on the front of the device without any additional software. The status LEDs on the front of the eCap give a convenient indication of the device and communication condition.
Future firmware updates or pre-configurations of the eCap may be performed by the integrated Modbus RTU interface. The Tele Modbus Configurator allows users to configure the eCap and display the measured values and firmware version.
Rugged, IP67-rated waterproof and dustproof embedded computers Vepac Electronics
Industrial Computer Hardware
The QBiX-WP embedded system range from Vepac Electronics is built inside a sealed aluminium chassis with M12 connectors, operating in extreme temperatures and withstanding heavy dust or liquid immersion for harsh factory floors and outdoor installations.
Read more...Powerful industrial motherboard Vepac Electronics
Industrial Computer Hardware
AAEON’s MIX-PTLWV1 Mini-ITX motherboard introduces Intel Core Ultra series 3 processing, offering greater memory capacity, faster networking and a wide power input range for high-performance industrial AI at the edge.
Read more...Zinc-based batteries power a more sustainable energy future
Electrical Power & Protection
Zinc-based batteries are gaining ground as a safe, recyclable and cost-effective energy storage option, from consumer electronics to grid-scale systems. The International Zinc Association’s Simon Norton explains why zinc is well placed to support the clean energy transition.
Read more...Energas introduces lower-cost German gas genset for South African market
Electrical Power & Protection
Energas Technologies will supply R Schmitt Enertec’s new Energy Line genset to the South African market, offering German-engineered gas-to-power generation of 400 to 500 kW at a lower entry cost through focused standardisation and a simpler standalone architecture.
Read more...ACTOM plays key role in large transmission substation project in Swellendam ACTOM Electrical Machines
Electrical Power & Protection
ACTOM has been appointed to engineer, procure, construct and commission the 1000 MVA main transmission substation for the Overberg Wind Farm in Swellendam, one of the largest substations of its kind in South Africa.
Read more...Reliable power conversion from high-voltage DC buses Conical Technologies
Electrical Power & Protection
The MEAN WELL DDRH-240 from Conical Technologies is a high-reliability DIN-rail DC-DC converter with a wide 250 to 1500 V DC input range, deriving stable low-voltage power directly from high-voltage DC buses in renewable energy, storage, charging, railway and industrial installations.
Read more...AES maintains a strong value and safety stance on boiler retrofits
Electrical Power & Protection
AES Commercial Director Dennis Williams explains when a boiler retrofit makes more sense than replacement, outlines the range of efficiency and emissions upgrades available, and draws the line at safety: a boiler not legally signed off is shut down, no exceptions.
Read more...The grid needs to become more intelligent Schneider Electric South Africa
Electrical Power & Protection
South Africa’s power grid is becoming bidirectional and far more dynamic as distributed energy resources proliferate. Schneider Electric’s Nishandra Bajinath explains why digitalisation, DERMS and aggregation are essential to keep this increasingly complex grid stable and efficient.
Read more...Innodisk launches APEX series edge AI systems for industrial deployment Vepac Electronics
IT in Manufacturing
Innodisk has launched its APEX series edge AI systems, combining hardware, software and system design to simplify industrial AI deployment. The APEX-A100, powered by Qualcomm’s Dragonwing IQ9 processor, delivers up to 100 TOPS with guaranteed availability through 2038.
Read more...ACTOM’s integrated electrical solutions reduce project risk and accelerate delivery
Electrical Power & Protection
ACTOM has secured multiple orders across four divisions for the Naos-1 hybrid solar and battery project in the Free State, demonstrating its integrated model for supplying the full electrical chain from high-voltage equipment to distribution transformers.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version