Electrical Power & Protection


Rethinking power for Africa’s data centres

April 2026 Electrical Power & Protection

Africa’s digital economy is scaling faster than its power systems. Cloud regions, AI workloads, fintech, health platforms and government digitisation are all driving a wave of new data centres across the continent; but too many of these facilities are still designed around the assumption that when the grid fails, diesel will save the day. In an era of constrained grids, volatile fuel logistics and tightening ESG expectations, this approach is no longer fit for purpose.

The reality on the ground is familiar to every African operator. Grid instability is the rule. Voltage sags and swells, harmonics and frequency excursions threaten both IT uptime and cooling performance. Simply adding more protection devices does not solve the problem if operators cannot see what is happening on their networks. Power quality visibility, through advanced metering and analytics, has become as strategic as server monitoring.

At the same time, capacity constraints on MV feeders and delays to substation upgrades are slowing down expansion from 5 to 20 MW starter sites to 50 to 100 MW and beyond. The risk is that if power infrastructure cannot scale at the same pace as digital demand, the continent’s cloud ambitions will stall.

Rethinking reliability

If Africa wants resilient, competitive and sustainable data centres, the starting point must be a grid-to-chip architecture rather than a genset-first mentality. This means treating the entire stack, from utility interconnection down to the rack, as a digitally orchestrated system.

On the MV side, digital switchgear with built-in protection and automation can isolate faults in milliseconds and enable self-healing topologies, improving uptime without brute-force redundancy. SF6-free switchgear technologies also remove a major greenhouse gas from the reliability equation.

Closer to the IT load, high-efficiency, lithium-ion UPS systems are increasingly acting as both critical protection and grid assets. When combined with static transfer switches and modular low voltage distribution, they support selective coordination and enable facilities to ride through short disturbances without falling back on diesel. Layered on top, power quality meters and monitoring platforms provide analytics, alarms and compliance reporting that facility managers and regulators can trust.

Facilities that design for end-to-end selectivity maintain total harmonic distortion below 5%, keep the power factor above 0,95, and hold voltage within a tight band at critical buses see fewer nuisance trips, smoother cooling performance and more predictable SLAs.

Cutting diesel dependence with data and automation

The biggest mindset shift is moving from ‘backup at all costs’ to ‘digital energy management’. Battery energy storage systems (BESS) connected at MV level combined with UPS ride-through can provide minutes to hours of autonomy for most grid events. When operators use microgrid controllers and energy management systems to orchestrate the grid, PV, BESS, and generators in real time, they can materially reduce fuel burn without compromising uptime.

In practice, this means:

• Using peak shaving and demand limiting to reduce generator starts and spinning reserve.

• Prioritising solar PV during the day to offset low voltage loads.

• Dynamically shedding non critical loads, such as cooling or auxiliary systems, during severe events using DCIM and BMS integration.

• Running UPS and power conditioning in carefully validated high efficiency modes while keeping power quality within strict limits.

Indicative results from such approaches show 30 to 60 % less generator runtime and 10 to 20 % reductions in energy-related OPEX, alongside substantial Scope 1 and Scope 2 emissions savings. For operators courting global hyperscalers and cloud service providers, those numbers are part of the investment case.

From constraint to collaborator

None of this happens in a vacuum. Utilities and regulators sit at the centre of whether Africa’s data centre boom will deepen grid stress or strengthen grid resilience. Too often, engagement with utilities starts late and focuses narrowly on connection capacity. This needs to change.

Early interconnection studies, joint protection coordination and clear roadmaps for 10 to 50 to 100 MW expansion should be standard for strategic digital sites. Data centres are uniquely positioned to offer grid services such as reactive power support, fast frequency response and demand response using their UPS and storage fleets. If tariff structures, power purchase agreements and wheeling frameworks recognise this value, both sides win.

There is also a capability dimension. Co-developed training on power quality standards, protection philosophies and digital operations can help utilities and operators converge on a common language. This is decisive in markets where policymakers see digital infrastructure as a lever for inclusive growth, but where grid investment will take years to catch up.

Design patterns for Africa’s digital decade

What does a practical roadmap look like? For many African markets, a phased approach makes sense.

• Phase 1 (5 to 15 MW): Focus on power quality remediation, lithium ion UPS, modest PV penetration and 30 to 60 minutes of BESS, underpinned by SCADA visibility.

• Phase 2 (15 to 40 MW): Grow PV to 30 to 40% of daytime load, extend storage to 1 to 2 hours, introduce sophisticated microgrid control, and enable demand response.

• Phase 3 (40 to 100 MW): Build 2 to 4 hours of storage, leverage PPAs and wheeling, provide ancillary services to the grid, and expand MV feeders with advanced, SF6-free switchgear.

Across all phases, integrating cooling into the energy strategy is critical. Precision cooling with variable-speed drives tied into building and energy management systems can support load shifting. This typically improves power usage effectiveness by 0,1 to 0,2 margins that matter in hot climates and volatile grids.

Africa’s digital decade will be defined by data. Those operators, policymakers and utilities that treat power as a strategic digital enabler will shape where cloud regions land, where AI runs and which economies capture the value. Moving beyond diesel dependency towards hybrid, automated, sustainable energy systems is now imperative for Africa’s data driven future.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Schneider Electric’s Alliance Programme turns system integrators into trusted technology partners
Schneider Electric South Africa System Integration & Control Systems Design
: Schneider Electric’s Alliance Partner Programme is helping system integrators across Africa move beyond one-off projects and build the skills and service models needed to become long-term industrial technology partners.

Read more...
Retrofitting for sustainability
Schneider Electric South Africa Electrical Power & Protection
As budgets tighten and sustainability targets increase, retrofit and modernisation strategies are gaining traction across Africa, allowing organisations to upgrade only what limits performance while preserving existing infrastructure and extending asset life.

Read more...
Preparing Africa’s data centres for the demands of autonomous AI
Schneider Electric South Africa IT in Manufacturing
Africa’s data centre infrastructure must evolve significantly to support agentic AI workloads, with GPU-intensive computing, advanced cooling and reliable power demanding a fundamentally different approach to facility design and investment.

Read more...
USB-Datalogger for voltage 0 to 30 V DC
Vepac Electronics Electrical Power & Protection
The PeakTech 5186 is a data logger for DC voltages from 0 V to 30 V with terminals on the top of the device.

Read more...
Pole-top boxes for smarter, more secure electricity networks
Electrical Power & Protection
As South Africa accelerates the rollout of smart prepaid electricity metering, innovative enclosure technology from Power Process Systems is helping utilities improve network security, reduce electricity theft and protect critical electrical infrastructure.

Read more...
Next-generation motor management solution
Schneider Electric South Africa Motion Control & Drives
Schneider Electric has launched its TeSys Tera motor management solution in the West African market, combining advanced motor protection, digital connectivity and real-time diagnostics for manufacturing, mining and water applications.

Read more...
Simplifying electrical design compliance
Electrical Power & Protection
Referro Systems highlights how Rockwell Automation’s Global SCCR Tool simplifies short-circuit current rating compliance for complex industrial electrical systems.

Read more...
Virtualising the control room to reshape building management systems
Schneider Electric South Africa IT in Manufacturing
Schneider Electric explains how virtualising building management systems frees facilities teams from ageing hardware, delivers stronger cybersecurity and enables portfolio-wide control from a single interface.

Read more...
Engineering resilience into Africa’s energy future
Electrical Power & Protection
Zutari’s managing director of water explains how Burundi’s landmark Jiji and Mulembwe hydropower projects demonstrate what resilient, climate-adapted infrastructure delivery looks like – and what this means for Africa’s energy future.

Read more...
How DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa PLCs, DCSs & Controllers
Schneider Electric argues that virtualising DCS environments breaks the cycle of hardware obsolescence, giving plant operators a smarter path to lifecycle modernisation without production disruption.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved