ENVIROsense, a new environmental temperature, relative humidity and, optionally, barometric pressure transmitter has been launched by Senseca, a leader in the design and manufacture of monitoring and measurement instrumentation. “With all three measurement criteria available in one device, ENVIROsense has been specifically designed for use in meteorological and renewable energies, HVAC and indoor, clean rooms, OEMs and plant environments,” said Jan Grobler, managing director of Senseca South Africa.
ENVIROsense offers multiple applications, long life, advanced measurement technology, and compatibility with any Modbus-RTU master device. It is already a market leader in the field of environmental monitoring instrumentation, and is by far the most competitively priced device.
The device offers a resolution of RH 0,01%, a temperature of ±0,1°C with ±0,1% of the measure value, and a pressure of ±0,5 hPa typical at T = 25°C and 0,1 hPa (500-1100 hPa) at T = full range. Two optional additional 0…1 V, 0…5 V or 0…10 V analogue outputs for temperature and relative humidity or dew point, with configurable temperature and humidity ranges are also available.
ENVIROsense provides calculated humidity quantities such as:
• Dew point.
• Wet bulb temperature.
• Absolute humidity.
• Mixing ratio.
• Specific enthalpy.
• Water vapour partial pressure.
• Specific humidity.
• Frost point temperature.
• Saturation vapour pressure above water.
• Saturation vapour pressure above ice.
With a rugged ø14 mm compact housing in PBT, it also serves as a protection shield from solar radiation in outdoor applications. The transmitter is supplied factory calibrated in multiple points for relative humidity and is ready for use. It can be supplied with an ISO/IEC 17025 calibration certificate if required.
Alternative models differ, depending on the presence or absence of the optional barometric sensor and analogue outputs, the different power supply voltage range, and in the different application field.
In order to maintain high accuracy measurements, it is necessary to clean the filter periodically. This simple process merely requires the filter to be unscrewed from the body of the transmitter and brush washed under running water. It is then dried and screwed back onto the transmitter body.
“Due to its multiple all-in-one application offering, we believe that the ENVIROsense transmitter will be positively received in those specialised industries where high accuracy standards are required. Its advanced technology makes it a leader in environmental measurement and monitoring instrumentation,” concluded Grobler.
Noncontact infrared temperature control in aluminium rolling process Instrotech
Temperature Measurement
The aluminium rolling process is critical to the aluminium manufacturing industry, where precise temperature measurement is essential for ensuring high-quality product output and protecting equipment. The Optris long-wavelength camera can accurately measure strip temperatures in cold rolling and coiling applications.
Read more...Where simplicity meets reliability Endress+Hauser South Africa
Temperature Measurement
The new iTEMP TMT31 temperature transmitter from Endress+Hauser combines simplified selection, ordering, installation and operation with the highest reliability and long-term stability in one product.
Read more...Advanced sensor technology to reduce vehicle fatalities Senseca
Sensors & Transducers
Measurement technology plays a critical role across a range of industries. This is especially true when supplying highly accurate and reliable data for road management entities that assist drivers of vehicles experiencing hazardous weather conditions.
Read more...Automating car window defrosters
Temperature Measurement
Window defrosters are vital features in vehicles, particularly in colder climates. The automotive manufacturer seeks an efficient solution to quickly and precisely measure the temperature of the windows, ensuring that the connections, installed cables and wires work correctly and have no defects before the vehicle’s final release.
Read more...The impact of thermal imaging in steam methane reformers
Temperature Measurement
As global demand for hydrogen, ammonia and fertilisers increases, LAND is empowering steam methane reformer operators to unlock efficiency gains at existing plants to meet ambitious production targets while also safely decarbonising.
Read more...Proven indicators monitored in three dimensions ifm - South Africa
Temperature Measurement
The VVB30x continuously detects vibrations in three measurement axes and uses them to calculate proven indicators for evaluating machine condition.
Read more...Self-contained standalone lightning warning system Senseca
Electrical Power & Protection
The BTD-200 lightning warning system from Biral (UK) is a complete detection and warning system. Its highly specialised aviation grade lightning detection technology delivers the warning as soon as lightning is detected and before the first strike.
Read more...Digital display electronic sensors Transducer Technology
Temperature Measurement
The Trantech TTED series is a versatile range of digital display sensors designed for high-accuracy measurement of pressure, flow and temperature.
Read more...Quality process control instrumentation Instrotech
Temperature Measurement
Instrotech is a leading provider of high-quality process control instrumentation and industrial automation solutions that are designed to optimise efficiency, reliability and safety across industries.
Read more...Three ways to conduct thermal inspections Comtest
Temperature Measurement
There’s no universal solution for all infrared inspections with a Fluke thermal camera, also known as a thermal imager. You need to match your method to the type of equipment you’re inspecting and the level of detail you require.
printer friendly version