Instrotech, local representative of SELET, has introduced a new series of capacitive sensors with more compact dimensions than older sensors on the market – 40 mm in total, of which 33 mm is the threaded section for the flush version and 50 mm in total, for the non-flush version. New constructive technology played a large part in the development of these products. For instance, the sensitivity adjustment is no longer via a trimmer, but uses a ‘teach’ switch located on the back of the sensor.
Key features of the new SELET sensors include:
• Metal casing with a compact 18 mm diameter.
• Dimensions of flush version: L=40 mm (thread of 33 mm).
• Dimensions of non-flush version: L=50 mm (thread of 33 mm).
• Automatic or manual teach-in mode for sensitivity calibration.
• NO or NC output, setting by teach-in.
• Cable connection L=2 m or L=200 mm with M12 pigtail connector.
• Versions: 3-cables PNP NO/NC and 4-cables NO+NC.
SELET, based in Turin, Italy, produces components for automation fields with inductive sensors that address the limitations of mechanical switches in automation. It also produces capacitive and photoelectronic sensors and rotary encoders (incremental and absolute). The company seeks to develop customer-driven products while enjoying a worldwide presence through distribution networks and direct contacts. Product information at www.bit.ly/3DI9KGj
Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...PDS implementation on mines
Sensors & Transducers
Level 9 vehicle intervention for collision avoidance has been mandatory on South African mines since 2022, yet the effective roll-out of proximity detection systems remains slower than expected. This is not due to the technical limitations of integration but to operational readiness on site.
Read more...Monitoring analogue process values ifm - South Africa
Sensors & Transducers
Everywhere in industry, electronic sensors are used to detect process values such as temperature, pressure or flow. Process value monitoring often takes place directly in the sensor.
Read more...Protecting buildings’ embodied carbon with retrofitted systems Schneider Electric South Africa
Sensors & Transducers
The World Economic Forum has said that around 80% of the buildings in existence will still be around in 2050; it is therefore essential that in order to combat climate change we retrofit them for energy efficiency.
Read more...Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...Enhancing gold leaching efficiency Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser offers a range of advanced technologies designed to enhance the stability and accuracy of pH and dissolved oxygen measurements on gold processing plants.
Read more...Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.
Read more...The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.
Read more...High-performance LineScan camera
Sensors & Transducers
Lynred, a global leader in infrared imaging technologies, has launched its next-generation SWIR LineScan camera and sensor, specifically designed for the inspection of silicon wafers, solar panels and waste management.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version