The IoT offers smart solutions that help make life easier and more convenient, improve and streamline processes, and receive information in good time that were previously unavailable or difficult to acquire. Smart solutions are highly personalised but always begin with an object and a sensor.
The risk of explosion is a key issue when it comes to chemicals. Warehouses belonging to chemical manufacturers and distributors contain numerous different chemical containers holding all manner of different explosive and harmful contents.
More often than not, the fill level inside chemical containers is neither measured nor displayed visually on the outside. One option would be to install a highly resistant float gauge, but this is not sufficient to guarantee safe transport or to monitor the contents of the tank continuously during transport. Yet continuous monitoring is an essential factor in guaranteeing a delivery in line with the relevant standards.
If the pressure within the container is measured, as well as the fill level, it is possible to check whether the container is properly sealed or whether it was opened during transport.
The log also indicates whether or not the container was subjected to excessive accelerations.
In this application, the fill level is also measured by two compact pressure transducers, the series 7LD. Keller has assisted in finding a solution which integrates the transducers while allowing the container to hold its original form. Since the container is under pressure, one transducer is affixed at the top of the container to measure the ullage* pressure, and the other transducer affixed at the bottom to measure total container pressure. The differential pressure between the two 7LD transducers is equal to the chemical level within the container.
This information, along with temperature and container location, is transmitted to facilitate access to information where it is needed to ensure proper chemical monitoring.
*Ullage is defined as the volume of vapour above a liquid in a sealed storage tank.
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...The data-driven path to sustainable manufacturing ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...Expanding visibility in mining operations Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...Fiber-optic amplifiers for precise object detection ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...Distance sensor for confined spaces ifm - South Africa
Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.
Read more...Optimise sludge treatment and reduce operational costs Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser’s inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
Read more...Inclination sensors for motion control ifm - South Africa
Sensors & Transducers Motion Control & Drives
The JBC dynamic inclination sensor from ifm offers accurate angle measurement in the most demanding conditions, filtering out motion disturbances such as vibrations, shocks and vehicle dynamics to deliver reliable inclination values via IO-Link or programmable switch outputs.
Read more...Fully integrated standalone thunderstorm warning system Senseca
Sensors & Transducers Analytical Instrumentation & Environmental Monitoring
Senseca South Africa has introduced its BTD-1 fully integrated, standalone thunderstorm warning system, which detects lightning by monitoring the background quasi-electrostatic field. The system can generate alerts before the first lightning strike, with a detection raterange of up to 83 km.
Read more...Field calibration made easy Instrotech
Maintenance, Test & Measurement, Calibration
Instrotech’s locally designed and manufactured Calog calibrator range feature a rugged IP54-rated housing, backlit display with data logging via SD card, and a lithium-ion battery with approximately eight hours of run time.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version