IIoT/Industry4.0/4IR – they cover a large area and don’t always mean the same thing. So how do we define any of these terms? Basically, they are about improving manufacturing efficiency, largely through the intelligent use of data. There is a lot of jargon that goes with this, and Lloyd Townsend of WIKA did a good job of unravelling much of it at the last branch technology evening.
Cheryl Hird thanks Lloyd Townsend after the presentation.
Since it is there, it is tempting to use the cloud for everything, as no investment in hardware is required. However, the drawback is that it can take a relatively significant time to get feedback on the data and hence the emergence of edge computing, where time-critical information is processed right at the application.
Where does the data come from? First of all, a 4-20 mA signal can be used. However, it can only be used once it is in digital form by the control system. Microprocessor-based instruments usually contain much more information than just the process variable, and this can also be used. If the field devices are connected to a bus, whole groups of data can be aggregated, and sent to the cloud in a batch, using a variety of communication protocols. As this data is not usually time-critical, security and accuracy of data is more important than speed. There are a variety of LPWANs (low power WANs) which can do this, one of the more recent being MIOTY. The essence of this is that that the data is broken down into packets, and forward error correction applied. This minimises requests for repeat packets, and, because the data is scattered in small packets, it is difficult for potential hackers to trace.
What about digital twins? As Lloyd explained, system designers generally have a good idea of the desired operation of any system. A virtual – or digital – twin is created, which reacts in the same way the physical system is supposed to, somewhere in the cloud. This can be compared with its real-life counterpart in the cloud, to check whether the desired outcome has been achieved.
Lloyd covered a huge amount in a short period of time, all of it very well presented. The branch thanks WIKA for hosting the evening.
International robotics conference streams live to Africa
SAIMC
The SAIMC hosted five live-stream viewing events across South Africa for the IEEE International Conference of Robotics and Automation in Vienna, bringing global robotics research and technology directly to local industry and academia.
Read more...From the office of the CEO: Introduction to GRIP SAIMC
SAIMC
Industry has long been concerned about graduates who have no understanding of the modern equipment they will face in industry. This has triggered an investigation into the possibility of creating a facility whereby graduates register with the SAIMC and rotate through all the vendors to obtain experience on modern equipment.
Read more...SAIMC: Durban branch SAIMC
SAIMC
The SAIMC Durban Branch hosted a technology meeting featuring a presentation by Abacus Automation on the practical role of AI in industrial automation, drawing considerable interest from attendees.
Read more...SAIMC: Johannesburg branch SAIMC
SAIMC
Instrotech recently hosted a technical presentation on load cell technology and applications at the SAIMC Johannesburg Technology Evening, presented by Trevor Salzwedel. The session covered load cell fundamentals, selection and installation, mechanical considerations and calibration methods.
Read more...SAIMC: Johannesburg Golf Day SAIMC
SAIMC
The SAIMC Johannesburg Golf Day on 22 May 2026 brought together 16 four-balls for a day of golf, networking and fundraising, with generous support from sponsors across the instrumentation and control sector.
Read more...SAIMC: Johannesburg branch SAIMC
SAIMC
The Johannesburg Branch had the privilege of being hosted by Phoenix Contact for our technology event in May. Shamil Surbun, BU manager for Automation, presented a CPD-accredited session on ‘From Sensor to Cloud: How SPE and APL Are Transforming Industrial Connectivity’.
Read more...From the office of the CEO: Power Hour goes national SAIMC
SAIMC
South Africa’s automation, control, mechatronics and computer engineering community is changing fast, and the SAIMC is changing with it. I am excited to announce a new national initiative that will reshape how we deliver technical knowledge, strengthen branch identity and bring our community together like never before.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version