Phoenix Contact is offering two new measuring transducers for PT100 sensors, standardised to IEC 751. On the input side they cover temperatures from -100 to +600°C with standard two, three, and four-wire termination. On the output side there is either a 0(4)...20 mA current signal or a 0...5 V, 0...10 V voltage signal available. The modules are preprogrammed according to the customer's specific requirements and adjusted so that there is no need for elaborate parameterisation. Measuring section adjustment can be performed on internal, readily accessible zero/span testers.
As a counterpart to the measuring transducer there is also a monitoring module available with relay changeover output. The measuring range is -100°C to +700°C and the operating point can be set easily with a DIP switch and potentiometer.
All the modules have 3-way electrical separation and are available in the slim 12,5 mm ME housing.
Outdoor cellular routers for potentially explosive areas Phoenix Contact
IS & Ex
Phoenix Contact has extended its Cellulink outdoor cellular router range with new versions approved for Zone 2 potentially explosive areas, featuring end-to-end IECEx and ATEX certification of the complete router, antenna path and antenna system.
Read more...Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...The wireless route to safer, more efficient mining operations Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...The data-driven path to sustainable manufacturing ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...Expanding visibility in mining operations Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...Fiber-optic amplifiers for precise object detection ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...A software-based controller for the industrial future Phoenix Contact
IT in Manufacturing
With Virtual PLCnext Control, Phoenix Contact is launching a software-based controller solution that enables flexible automation functions in virtualised IT environments.
Read more...Distance sensor for confined spaces ifm - South Africa
Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version