Comtest now offers the latest Fluke E-DWT-H electronic deadweight tester, an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Improvements include:
• No weights to load and unload, transport, or send for calibration.
• Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature.
• No piston-cylinder changes.
• No significant sensitivity to level or vibration.
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration.
• Operates in any unit of measure, switching easily from one unit to the next.
The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. The 0,02% of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. High quality hardware allows easy system fill and prime, pressure generation and precise control up to 200 Mpa. The kits are compact, lightweight and transportable, with an optional battery/charger pack which supports up to eight hours of operation away from line power, while an optional shipping and carrying case with handles and wheels allows for easy transport in the field.
The Fluke Deadweight Tester model 6531 offers E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 to 100% of device full scale.
Model 6532 offers an additional Q-RPT to maximise workload coverage, with percent of reading performance from 1 to 100% of device full scale. The vacuum fill kit included allows the E-DWT to be filled with the user’s choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adaptor to mount virtually any pressure device to be tested without using PTFE tape or wrenches.
For more information contact Comtest, +27 10 595 1821, [email protected], www.comtest.co.za
| Tel: | +27 10 595 1824 |
| Email: | [email protected] |
| www: | www.comtest.co.za |
| Articles: | More information and articles about Comtest |
© Technews Publishing (Pty) Ltd | All Rights Reserved
printer friendly version