Keller’s Leo 5 high-resolution digital manometer features precise sensor technology, fast signal processing, peak recording and data storage with a time stamp. Designed for deployment in hostile environments, the instrument features a robust stainless steel housing, safety glass front, a 16 mm backlit display and capacitive touch controls.
Recording and analysing pressure peaks
Undetected pressure ‘spikes’ are a common cause of premature wear and untimely failures in pneumatic and hydraulic systems. In freshwater systems, this phenomenon is sometimes called ‘water hammer’. The Leo 5, with its pressure peak analysis mode, will sample and record system pressure at a rate of 5 kHz and with 16 bit resolution, enabling the troubleshooter to positively characterise system behaviour. With storage capacity for over 50 000 peak values, including temperature and time stamp, data from the data is exportable for detailed analysis via the included USB interface.
In the standard measurement mode, the unit operates at a sampling rate of 2 kHz and with an A-to-D resolution of 20 bits. The line-up includes seven standard full-scale pressure ranges between 3 and 1000 bar. In the temperature range of 0-50°C, the TEB (total error band) for pressure is ±0,5% FS.
Other features
The LEO 5 is available with a wide range of optional features, including a standard radio interface for measurements in inaccessible or mobile locations. Traditional analog outputs of 4-20 mA and 0-10 V DC and up to two switch outputs for process control and monitoring can also be provided. Configuration and data transmission take place via USB or RS-485 interface. Special housing materials, pressure connections and other user-specific options are available.
With high resolution for accurate measurement, pressure peak analysis and measurement data recording, the instrument has been adopted as an indispensable tool by pneumatic and hydraulic system mechanics.
Sitrans P320/P420 pressure transmitters with PROFINET over Ethernet-APL
Pressure Measurement & Control
Siemens’ Sitrans P320/P420 pressure transmitters are now available with PROFINET over Ethernet-APL, enabling data transmission at 10 Mb/s over cable lengths of up to 1 000 m with built-in intrinsic safety for use in hazardous areas.
Read more...Pressure sensor for robust measurement and clear communication ifm - South Africa
Pressure Measurement & Control
ifm’s G1/2 PF pressure sensor monitors highly viscous or abrasive media directly on the system, with a robust ceramic measuring cell, a rotatable display and a flush design that prevents clogging.
Read more...Precision solutions for extreme conditions VEGA Controls SA
Pressure Measurement & Control
VEGA’s VEGAPULS radar sensors, VEGABAR pressure transmitters and VEGASWING level switches deliver reliable measurement in chemical storage environments handling corrosive acids, alkalis and volatile hydrocarbons, with ATEX and IECEx certification for hazardous zones.
Read more...The hydrogen economy is moving from concept to industrial reality VEGA Controls SA
Editor's Choice Pressure Measurement & Control
Scaling the hydrogen economy requires safe, efficient and tightly controlled processes across generation, storage, distribution and end use, underpinned by accurate instrumentation for pressure, temperature, level and flow measurement.
Read more...VEGA pressure instrumentation supports resilient water network management VEGA Controls SA
Pressure Measurement & Control Flow Measurement & Control
As rapid urbanisation and climate pressures strain water networks across Africa, accurate real-time pressure monitoring has become a strategic necessity. VEGA’s pressure instrumentation helps utilities reduce losses, protect infrastructure and meet sustainability targets.
Read more...Field calibration made easy Instrotech
Maintenance, Test & Measurement, Calibration
Instrotech’s locally designed and manufactured Calog calibrator range feature a rugged IP54-rated housing, backlit display with data logging via SD card, and a lithium-ion battery with approximately eight hours of run time.
Read more...Groundwater level measurement using LoRa module Instrotech
Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.
Read more...Infrared solutions for glass manufacturing challenges Instrotech
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Embracing digital precision in instrument manufacturing SA Gauge
Pressure Measurement & Control
In modern instrumentation manufacturing, precision is no longer limited to measurement alone. One area undergoing notable change is the printing of instrument plates and branded components.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version