The Leo 3 is a digital pressure indicator designed for permanent installation. It is a combination 2 wire 4-20 mA transmitter with programmable dual local indication of pressure in selectable units: (bar, mbar/hPa, kPa, MPa, PSI and kp/cm2).
This is part of Instrotech's successful Leo range of digital pressure indicators manufactured by Keller of Switzerland and is available for vacuum or pressure measurement.
Standard ranges are 0 to 400 kPa (4 bar) absolute, 0 to 3 Mpa (30 bar) absolute, 0 to 30 MPa (0-300) and 0-70 Mpa (0-700 bar) with a measuring rate of up to 90 times/sec. The units work off supply voltages of 8 to 28 V d.c. with temperature compensation over the range 0-50°C.
The output display is in mA. Besides 4 to 20 mA analog current loop, the transmitter also has an RS485 interface to output the pressure value and access instrument characteristics. The analog output can be programmed without applying pressure to the instrument. The min/max and zero adjustments are performed using the two pushbuttons on the front of the instrument.
The pressure connection is standard G quarter inch parallel thread with a seal and the electrical connection is via a Binder back entry plug. Manufactured to ISO 9001 standards, the Keller Leo 3 offers IP65 environmental protection against dust and low-pressure water jets. Dimensions are 76 x 125 x 50 mm, with a weight of 210 grams.
Sitrans P320/P420 pressure transmitters with PROFINET over Ethernet-APL
Pressure Measurement & Control
Siemens’ Sitrans P320/P420 pressure transmitters are now available with PROFINET over Ethernet-APL, enabling data transmission at 10 Mb/s over cable lengths of up to 1 000 m with built-in intrinsic safety for use in hazardous areas.
Read more...Pressure sensor for robust measurement and clear communication ifm - South Africa
Pressure Measurement & Control
ifm’s G1/2 PF pressure sensor monitors highly viscous or abrasive media directly on the system, with a robust ceramic measuring cell, a rotatable display and a flush design that prevents clogging.
Read more...Precision solutions for extreme conditions VEGA Controls SA
Pressure Measurement & Control
VEGA’s VEGAPULS radar sensors, VEGABAR pressure transmitters and VEGASWING level switches deliver reliable measurement in chemical storage environments handling corrosive acids, alkalis and volatile hydrocarbons, with ATEX and IECEx certification for hazardous zones.
Read more...The hydrogen economy is moving from concept to industrial reality VEGA Controls SA
Editor's Choice Pressure Measurement & Control
Scaling the hydrogen economy requires safe, efficient and tightly controlled processes across generation, storage, distribution and end use, underpinned by accurate instrumentation for pressure, temperature, level and flow measurement.
Read more...VEGA pressure instrumentation supports resilient water network management VEGA Controls SA
Pressure Measurement & Control Flow Measurement & Control
As rapid urbanisation and climate pressures strain water networks across Africa, accurate real-time pressure monitoring has become a strategic necessity. VEGA’s pressure instrumentation helps utilities reduce losses, protect infrastructure and meet sustainability targets.
Read more...Field calibration made easy Instrotech
Maintenance, Test & Measurement, Calibration
Instrotech’s locally designed and manufactured Calog calibrator range feature a rugged IP54-rated housing, backlit display with data logging via SD card, and a lithium-ion battery with approximately eight hours of run time.
Read more...Groundwater level measurement using LoRa module Instrotech
Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.
Read more...Infrared solutions for glass manufacturing challenges Instrotech
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Embracing digital precision in instrument manufacturing SA Gauge
Pressure Measurement & Control
In modern instrumentation manufacturing, precision is no longer limited to measurement alone. One area undergoing notable change is the printing of instrument plates and branded components.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version