November 2017Maintenance, Test & Measurement, Calibration
Fluke has introduced two 3-phase power loggers – the 1736 and 1738 – to give users the data needed to make critical power quality and energy decisions in realtime. They are specifically engineered to conduct energy studies and basic power quality logging, automatically capturing and logging over 500 power quality parameters for more visibility into the data needed to optimise system reliability and savings.
The loggers are the first three-phase power loggers built with the Fluke Connect mobile app and software, enabling users to measure, capture and log all relevant characteristics of electric power and enable access to management and analysis of large data sets.
The 1736 and 1738 provide:
• More history: automatically captures and logs over 500 power quality parameters.
• Reduced uncertainty: visibility through Fluke Connect enables users to view collected data to ensure it is correct, either at the panel or remotely. By powering the logger directly from the measured line and the intelligent verification function that digitally corrects common connection issues, measurement system errors are significantly reduced.
• Better decision making capabilities: data can be accessed and shared remotely via the Fluke Connect app to maintain safer working distances and make critical decisions in realtime, reducing the need for protective equipment, site visits and check-ins. Chart and graph measurements to create detailed reports with Fluke Energy Analyze Plus software.
The Fluke 1736 and 1738 have more power quality measurement capability than their predecessor, the Fluke 1730, a pure energy logger. This functionality is a subset of the Fluke 1736/1738. For users performing both basic power quality studies and energy studies, the new loggers enable users to measure, capture and log all relevant characteristics of electric power and gives access to management and analysis of large data sets. The 1738 includes advanced limit-based analysis (uses EN510160 limits), the capability to connect two Fluke Connect devices for logging of supplementary parameters and a WiFi/Bluetooth (BLE) dongle.
Clog-resistant nozzle for powerful stationary tank cleaning
Maintenance, Test & Measurement, Calibration
As EXAIR and BETE continue to build on a strong partnership, EXAIR has recently added a selection of BETE products to the site, including the innovative BETE HydroClaw tank and vessel cleaning nozzle.
Read more...Clog-resistant nozzle for powerful
Maintenance, Test & Measurement, Calibration
As EXAIR and BETE continue to build on a strong partnership, EXAIR has recently added a selection of BETE products to the site, including the innovative BETE HydroClaw tank and vessel cleaning nozzle.
Read more...Why your next oscilloscope should Comtest
Maintenance, Test & Measurement, Calibration
The PC-based USB oscilloscope is a cutting-edge, adaptable alternative to traditional benchtop oscilloscopes that’s redefining test and measurement.
Read more...Comtest calibration user group seminar Comtest
News
Comtest invites metrology and calibration professionals to a focused technical seminar series aimed at demystifying some of the most common hurdles in inter-laboratory comparisons.
Read more...Industrial acoustic imaging tool Comtest
Pneumatics & Hydraulics
Comtest offers the Fluke ii Industrial Acoustic Imager series, a hand-held, easy-to-use tool that visualises sounds coming from small leaks in compressed air, gas and vacuum systems.
Read more...Wireless test tools Comtest
Electrical Power & Protection
Fluke has on offer the Fluke 376 FC True-RMS Clamp Meter with iFlex, the most advanced troubleshooting tool for industrial and commercial electricians
Read more...Automated test and measurement Comtest
Maintenance, Test & Measurement, Calibration
Comtest, in partnership with global brands, provides customised solutions with integrated hardware and software for efficient testing and data collection.
Read more...Advanced field calibrator and communicator
Maintenance, Test & Measurement, Calibration
The Beamex MC6 is a high-accuracy field calibrator that offers automatic calibration capabilities for pressure, temperature and various electrical signals.
Read more...Three ways to conduct thermal inspections Comtest
Temperature Measurement
There’s no universal solution for all infrared inspections with a Fluke thermal camera, also known as a thermal imager. You need to match your method to the type of equipment you’re inspecting and the level of detail you require.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version