October 2017Maintenance, Test & Measurement, Calibration
Fluke has on offer the Ex dual range pressure calibrator for use in classified environments, offering ranges, accuracies and capabilities ideal for gas custody transfer measurements. The Fluke 721Ex, with IECEx and Atex Ex ia IIB T3 Gb (Zone 1) ratings, is available in 14 models and can be used with a Fluke 720RTD probe for temperature measurement. Fluke has also introduced the 700 series pressure test hose and pump kits, which minimise leaks when connecting a pressure calibrator or pump to a device under test. The quick installation, without the use of tools, increases efficiency and saves time. These pressure accessories are a best-in-class set of premium hose and No Tools Required (NTR) pressure connection accessories.
The rugged Fluke 721Ex dual range pressure calibrator, featuring two isolated stainless steel pressure sensors with accuracies to ±0,025% full scale, provides measurement of static pressure, difference in pressure and temperature of gas flow. The Fluke 721Ex is configured by choosing either a 1,1 bar or 2,48 bar low pressure sensor, together with one from seven high pressure ranges, including 6,9, 20, 24,5, 69, 103,4, 200, or 345 bar. The large backlit display will show two pressure readings and a temperature reading simultaneously. Up to five frequently used setups can be stored.
The Fluke 700 pressure calibration test kits introduce a family of pressure connection accessories to make the difficult task of making pneumatic and hydraulic pressure test connections easy and leak free. This family of accessories includes two special transmitter test hoses, the TTH5K and the TTH10K, providing NTR connections between hand pumps or pressure transmitter to the standard IEC 64 mm female input on most pressure transmitters worldwide. The 700MTH test hose is similar to the 700TTH but has a 64 mm male metric hose termination rather than the 64 mm NPT male connection. The 700M20TH is intended for connection to female Chinese M20 process connections.
The new 700PTPK2 pneumatic test pressure kit and 700HTPK2 hydraulic test pressure kit are premium versions of the standard 700PTPK and 700HTPK, and add premium test hoses and a NTR connection to attach and remove 700G test gauges easily, or other devices with 64 mm NPT male terminations. The Fluke 721Ex is supplied with a soft case offering storage for an RTD probe.
Mini data loggers for temperature and humidity monitoring
Maintenance, Test & Measurement, Calibration
Testo’s range of four compact data loggers covers temperature and humidity monitoring for storage, refrigeration and transport applications, with USB-C or Bluetooth connectivity and capacity for up to 16 000 readings.
Read more...Alternative fuels for cutting, brazing, soldering and heating
Maintenance, Test & Measurement, Calibration
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.
Read more...Installation safety tester Vepac Electronics
Maintenance, Test & Measurement, Calibration
A combination measuring device for testing electrical installations, offering safety tests including RCD, voltage, loop, low-resistance, earth resistance and insulation checks via a 3,5-inch TFT colour display.
Read more...Linear regulated 2-channel laboratory power supply Vepac Electronics
Maintenance, Test & Measurement, Calibration
Vepac Electronics offers a dual-channel laboratory power supply built for safe, precise testing in laboratories and workshops.
Read more...When oil gets old Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck explains how oxidation breaks down lubricating oils over time, and how routine oil analysis can catch the warning signs before equipment failure.
Read more...SEW-EURODRIVE brings intelligent energy optimisation to Electra Mining SEW-EURODRIVE
Maintenance, Test & Measurement, Calibration
At Electra Mining Africa 2026, SEW-EURODRIVE will showcase its DriveRadar IoT platform for predictive maintenance and real-time energy optimisation, alongside plant energy surveys and an 1850 kW medium voltage motor display.
Read more...Thermal imaging camera with high thermal resolution Vepac Electronics
Temperature Measurement Maintenance, Test & Measurement, Calibration
Vepac Electronics introduces a compact thermal imaging camera that helps technicians spot temperature problems before they become costly failures.
Read more...What your lubricant really costs
Maintenance, Test & Measurement, Calibration
The purchase price of an industrial lubricant is only a fraction of what lubrication truly costs a business. Lubrication Engineers South Africa explains how shifting from unit price to total cost of ownership changes the equation significantly.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version