Bosch launches new generation of rotary hammers

October 2017 Maintenance, Test & Measurement, Calibration

The GBH 18V-26 Professional and GBH 18V-26 F Professional are the latest additions to the Bosch range of rotary hammers with EC motors. The high performance makes them comparable with corded tools such as the GBH 2-26 Professional as the EC motor is highly efficient and completely maintenance-free. Users can choose between a model with a fixed chuck and a model with a changeable chuck, which is also supplied with a keyless chuck for round shank drill bits.

To allow installers to stay in complete control even when carrying out work on hard materials, such as drilling into reinforced concrete, Bosch has equipped the new tools with KickBack Control. If the rotary hammer turns suddenly or unpredictably on its drill axis, as can occur if the drill becomes jammed in reinforced concrete, the integrated sensor shuts off the motor in a fraction of a second.

In addition, the integrated Electronic Precision Control (EPC) feature supports drilling into delicate materials such as tiles. If the EPC function is activated, the maximum power of the rotary hammer is limited to 70%, with a slower run-up. This enables professionals to work in impact mode from the very start of their task by omitting one work step. The bit is prevented from slipping off when the user starts to drill, and precise results can be achieved quickly and easily.

When developing the new generation of 18 V rotary hammers, Bosch also redesigned the shape of the tools and optimised them for ergonomic work. The handle is now in line with the drill axis on both tools. This ‘L’-shape reduces the effort and fatigue involved during working. In addition, both rotary hammers feature efficient vibration damping. A damping element uncouples the main handle from the hammer drive, reducing vibrations actively.

To enable work in building stock in a dust-free environment, such as when retrofitting light fittings, the new hammers are offered with an active integrated dust extractor. The GDE 18V-16 Professional can simply be attached to the rotary hammer when required. It has its own motor, also supplied with power by the rotary hammer battery. To allow drilling to be carried out easily and cleanly using dust extraction, the dust extractor has an automatic power on/off function. It starts automatically at the same time as the hammer. However, to ensure optimal dust extraction, it continues to function for two seconds after the drilling operation is ended.

For more information contact Campbell Mhodi, Bosch Power Tools, +27 (0)11 651 9854, [email protected], www.bosch.co.za

Further reading:

Infrared thermometers for electrical, industrial and HVAC applications
Comtest Maintenance, Test & Measurement, Calibration
: Comtest, distributor of Fluke test and measurement equipment, explains how handheld infrared thermometers are transforming maintenance in electrical, industrial and HVAC environments, with three measurement strategies and a wide range of practical applications.

Read more...

---

Reverse-engineering legacy industrial gearbox parts
Maintenance, Test & Measurement, Calibration
WEG Africa’s turbine workshop uses 3D scanning technology to reverse-engineer components for legacy gearboxes, turbines and compressors, enabling equipment to run for decades after OEM support and spare parts have dried up.

Read more...

---

Unlocking ICCP remote monitoring
Omniflex Remote Monitoring Specialists Maintenance, Test & Measurement, Calibration
Cathodic protection keeps buried and submerged pipelines safe from corrosion, but verifying it traditionally means costly, hazardous manual site visits. Omniflex explains how a retrofit module brings remote monitoring to ageing transformer rectifiers without replacing functional infrastructure.

Read more...

---

Microdieseling – the explosions you never hear
Maintenance, Test & Measurement, Calibration
Microdieseling is a pressure-induced thermal degradation mechanism in which entrained air bubbles are compressed so rapidly that the surrounding oil ignites, producing soot, varnish and sludge. WearCheck explains how it happens, why the damage varies, and how oil analysis detects it.

Read more...

---

Electrostatic spark discharge – when static strikes back
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck technical manager, Steven Lumley explains how static electricity accumulates in modern low-conductivity lubricants, why compact system designs and fine filtration make ESD more likely, and how to recognise the degradation it leaves behind.

Read more...

---

High-speed cameras for crash testing
Horne Technologies Maintenance, Test & Measurement, Calibration
Vision Research has expanded its Phantom C-series with two cameras optimised for crash and safety testing, offering 4 and 8 megapixel sensors rated to 170G, up to 1180 frames per second, and Phantom Academy application training planned for South Africa next year.

Read more...

---

SKF extends remanufacturing expertise to bearing clearance modification
SKF South Africa Maintenance, Test & Measurement, Calibration
Using its clearance modification expertise, SKF helped a mining equipment OEM salvage spherical roller bearing inventory that would otherwise have been scrapped, confirming a new capability within its remanufacturing services and avoiding redundant procurement.

Read more...

---

When maintenance-system compliance starts replacing plant reliability
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck ARC division manager, Annemie Willer argues that the greatest threat to effective maintenance is no longer a lack of technology, but the gradual replacement of technical judgement by CMMS compliance, leaving no one owning the machine.

Read more...

---

Automatic lubrication systems drive mobile mine machine reliability and uptime
SKF South Africa Maintenance, Test & Measurement, Calibration
SKF’s Lincoln P203 progressive lubrication systems are improving reliability and uptime on mobile machines at a Zambian gold mine, with installation of 45 units completing by October 2026.

Read more...

---

Nitration: the acid you didn’t see coming
Wearcheck Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.

Read more...

---