The reason Conet is considered by many in the industry to be the most cost-effective data collection network available is its ability to operate on very low-cost cabling (any grade of a 2-core cable) which is often already available onsite as a free pair in a multi-core cable. In many instances Conet has proved to be the difference between projects going ahead or not, as the costs associated with recabling, digging of trenches to lay new cables and scaffolding for cable trays can be staggeringly expensive and disruptive. The ability to utilise spare cores in existing cables means that networks can be installed around buildings and across sites by inter-connecting these spare cores to form a single or multi-network solution very cost-effectively.
Omniflex’s range of multiplexing I/O products, such as the Maxiflex system and Teleterm RTUs, all support Conet, Modbus, Ethernet and radio comms, enabling all types of data to be cost-effectively transmitted around sites and monitored from virtually anywhere. Other features include:
• Up to 10 km transmission distance over one Conet network.
• Integration with other networks such as Modbus RS-485, Ethernet and radio.
• Unlimited number of Conet networks can be interconnected.
• Very high system reliability.
• Very high noise immunity.
• CRC plus automatic error detection.
• DCS and scada remote I/O.
• Data acquisition.
• Critical event monitoring.
For more information contact Ian Loudon, Omniflex Remote Monitoring Specialists, +27 (0)31 207 7466, [email protected], www.omniflex.com
Upgrading an outdated alarm monitoring system Omniflex Remote Monitoring Specialists
Industrial Wireless
Legacy alarm replacement specialist, Omniflex has successfully upgraded Guernsey Electricity’s MPAS90 alarm annunciator systems, which were first installed decades ago and are obsolete.
Read more...Introduction to Part 2 loop signatures and process transfer functions
Fieldbus & Industrial Networking
The previous series of loop signature articles dealt with the basics of control loop optimisation, and concentrated on troubleshooting and ‘SWAG’ tuning of simple processes. In this new series, consideration will be given to dealing practically with more difficult issues like interactive processes, and with processes with much more complex dynamics.
Read more...Siemens sets new standards in drive technology
Fieldbus & Industrial Networking
Siemens is setting new standards in industrial drive technology with the launch of its new high-performance drive system, Sinamics S220. This offers a seamless and innovative drive system with comprehensive simulation and analysis capabilities and advanced connectivity features that enable full integration into digital work processes.
Read more...Cathodic protection design considerations that influence ESG outcomes Omniflex Remote Monitoring Specialists
Electrical Power & Protection
Major infrastructure like wharves, bridges, pipelines and tanks are at constant risk of corrosion. David Celine, managing director of cathodic protection specialist Omniflex, explains how CP system design can support ESG commitments, while simultaneously lowering costs and improving maintenance capabilities.
Read more...PC-based control in the plastics industry Beckhoff Automation
Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.
Read more...Upgrading obsolete rack-based alarms Omniflex Remote Monitoring Specialists
Industrial Wireless
Legacy alarm replacement specialist, Omniflex has supported a major oil and gas company in Qatar by upgrading the obsolete MPAS 90 alarm systems at one of its major plants in the country.
Read more...Becoming a leader in alarm annunciators Omniflex Remote Monitoring Specialists
SCADA/HMI
The rise of the digital age and PC-based systems and graphical interfaces led many to view the traditional annunciator market as obsolete. Omniflex explains how the company saw the market differently to then established players like Highland and Rochester, and how it reshaped the industry.
Read more...Loop Signature 31: Non-linearity in control loops (Part 2) Michael Brown Control Engineering
Fieldbus & Industrial Networking
This article is a continuation of Loop Signature 30 published in the last issue in this series, exploring reasons for non-linearities which may be encountered in feedback control loops
Read more...PC-based control optimises robotic parts handling on plastics machinery Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
NEO is a cartesian robot developed by INAUTOM Robótica in Portugal for parts removal on plastics machinery. Its aim is to increase system productivity. NAUTOM Robótica has entered into a strategic partnership with Bresimar Automação to increase the working speed of the cartesian robots using advanced control and motion solutions from Beckhoff. The result is a comprehensive, future-proof automation solution for its entire family of cartesian robots.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version