The RS Pro ICM30R clamp meter is a portable and easy-to-use device with compact dimensions of 192 x 66 x 27 mm, and features a special hand-guard design, which provides additional user protection that prevents direct contact with electrical conductors.
Clamp meters are ideal tools for making spot checks and verifying system conditions. The compact and ergonomically designed RS Pro ICM30R is manufactured to work were you do, and has a four-feet drop-proof structure that integrates dual Hall sensors to provide reliable and accurate current measurements and provides the true-RMS AC current value of both pure and distorted waveforms. The nickel-steel alloy jaw design enables non-intrusive current measurement on cables and wires that are up to 25 mm in diameter.
The meter has a digital light-emitting diode (LED) display and an auto-ranging, 4000 count meter with data hold delay and high resolution. It has an AC/DC of 300 A capability and an AC/DC range of 600 V. Manufactured and tested to international standards of CAT III 300V, according to IEC 61010, this device offers quality, performance and value without compromise.
The RS Pro Test and Measurement range of products form part of the plant maintenance programme on offer from RS. This RS Pro ICM30R clamp meter has insulated input jacks and is supplied with a deluxe soft carrying case, which is now available at RS, a must-have device for any electrician’s or maintenance professional’s toolbox.
New compact robotics computer for intelligent machines, robotics and vision AI RS South Africa
Industrial Computer Hardware
RS is supporting the NVIDIA Jetson Orin Nano 2, an entry-level edge AI platform delivering twice the inference performance of its predecessor in the same compact 40 W form factor, giving South African developers new options for intelligent machines, robotics and vision AI.
Read more...Infrared thermometers for electrical, industrial and HVAC applications Comtest
Maintenance, Test & Measurement, Calibration
: Comtest, distributor of Fluke test and measurement equipment, explains how handheld infrared thermometers are transforming maintenance in electrical, industrial and HVAC environments, with three measurement strategies and a wide range of practical applications.
Read more...Reverse-engineering legacy industrial gearbox parts
Maintenance, Test & Measurement, Calibration
WEG Africa’s turbine workshop uses 3D scanning technology to reverse-engineer components for legacy gearboxes, turbines and compressors, enabling equipment to run for decades after OEM support and spare parts have dried up.
Read more...Unlocking ICCP remote monitoring Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Cathodic protection keeps buried and submerged pipelines safe from corrosion, but verifying it traditionally means costly, hazardous manual site visits. Omniflex explains how a retrofit module brings remote monitoring to ageing transformer rectifiers without replacing functional infrastructure.
Read more...Maximising uptime in data centres through smarter MRO strategies RS South Africa
Industrial Computer Hardware
RS South Africa is supporting data centre operators with access to more than 875 000 MRO products, digital procurement tools and inventory management solutions, as Africa’s data centre market continues to grow and operational resilience becomes a strategic priority.
Read more...Microdieseling – the explosions you never hear
Maintenance, Test & Measurement, Calibration
Microdieseling is a pressure-induced thermal degradation mechanism in which entrained air bubbles are compressed so rapidly that the surrounding oil ignites, producing soot, varnish and sludge. WearCheck explains how it happens, why the damage varies, and how oil analysis detects it.
Read more...Electrostatic spark discharge – when static strikes back Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck technical manager, Steven Lumley explains how static electricity accumulates in modern low-conductivity lubricants, why compact system designs and fine filtration make ESD more likely, and how to recognise the degradation it leaves behind.
Read more...High-speed cameras for crash testing Horne Technologies
Maintenance, Test & Measurement, Calibration
Vision Research has expanded its Phantom C-series with two cameras optimised for crash and safety testing, offering 4 and 8 megapixel sensors rated to 170G, up to 1180 frames per second, and Phantom Academy application training planned for South Africa next year.
Read more...SKF extends remanufacturing expertise to bearing clearance modification SKF South Africa
Maintenance, Test & Measurement, Calibration
Using its clearance modification expertise, SKF helped a mining equipment OEM salvage spherical roller bearing inventory that would otherwise have been scrapped, confirming a new capability within its remanufacturing services and avoiding redundant procurement.
Read more...When maintenance-system compliance starts replacing plant reliability Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck ARC division manager, Annemie Willer argues that the greatest threat to effective maintenance is no longer a lack of technology, but the gradual replacement of technical judgement by CMMS compliance, leaving no one owning the machine.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version