The ability to control a pump remotely over a long distance is now available using Teleterm M3 Radio RTUs.
The system comprises two Teleterm M3 Radio RTUs each housed in a weatherproof housing with a built-in PSU; one housing at the (local) remote control end with all the I/O dedicated to control inputs and pump feedback statuses and another at the pump (remote) side with all the I/O dedicated to control outputs and pump feedback inputs. The built-in radio allows up to 20 km line of sight between the two sets of controls. This allows easy plug-and-play with only the wiring of the power supply and the control circuits required. An optional HMI can be provided to do the control of the pump and to indicate statuses. The on-board Ethernet port also allows connection to an existing scada system thus saving on additional hardware.
A communications link indication is provided to show the system is up and running. Even the speed of the pump can be controlled as the unit includes both a 4-20 mA input and a 4-20 mA output.
The low power consumption of the system makes it suitable for use in a solar powered option if required and a battery can be included in the event of a mains power failure.
Benefits:
• Plug-and-play operation.
• Distance up to 20 km wirelessly.
• Low power operation.
• Alarm logging option on the Teleterm M3.
• Easy installation.
These benefits make it ideally suited for any remote control pump operation.
Omniflex delivers ICCP systems in London Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied impressed current cathodic protection systems for landmark London buildings, protecting reinforced concrete from corrosion and extending the service life of commercial, retail and heritage sites.
Read more...Modernising acid cooler protection without disrupting production Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied an advanced anodic protection control system to phosphate producer Foskor, replacing a legacy transformer rectifier system while maintaining uninterrupted production. The distributed PowerView CP solution provides remote monitoring and DCS integration.
Read more...Upgrading alarm systems for critical industries Omniflex Remote Monitoring Specialists
PLCs, DCSs & Controllers
Omniflex’s OMNI16R alarm annunciator platform provides a direct replacement for legacy CSA systems such as MPAS 90 and SA9100, enabling operators in oil and gas, nuclear and power generation to modernise alarm infrastructure without sacrificing the clarity required for safe operations.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex explains how integrating remote monitoring and cloud-based platforms into cathodic and anodic protection systems is helping process plant operators stay ahead of corrosion and make smarter maintenance decisions.
Read more...Meeting the demands of modern logistics
Industrial Wireless
When Jungheinrich set out to pack more storage into less warehouse space, its high-density PowerCube shuttles needed wireless links that never drop. This is how the intralogistics specialist worked with HMS Networks to keep its shuttles moving safely, and it points to where the partnership goes next.
Read more...Preserving a French heritage landmark Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex supplied a remotely monitored impressed current cathodic protection system for the Perret Tower in Grenoble, a protected French heritage site, combining 24/7 corrosion protection with integrated surge protection against lightning strikes.
Read more...Lessons in long-distance telemetry Omniflex Remote Monitoring Specialists
Industrial Wireless Data Acquisition & Telemetry
Key engineering lessons from decades of deploying wireless telemetry systems in demanding industrial applications, covering network management, power constraints, physical challenges and the value of open, simplified architectures.
Read more...Long-distance signal delivery is critical to rail safety Omniflex Remote Monitoring Specialists
Fieldbus & Industrial Networking
A remote monitoring specialist explains why fibre optic technology is increasingly replacing copper cabling in safety-critical railway signalling systems.
Read more...Omniflex upgrades faulty alarms at cereal manufacturing facility Omniflex Remote Monitoring Specialists
Industrial Wireless
Legacy alarm specialist, Omniflex has delivered a direct retrofit solution for ageing MPAS 90 alarm systems at Kellanova’s Wrexham facility, replacing obsolete units with its SIL-1 rated Omni16R rack-based alarm logic, and Omni-X LED Displays.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version