Sentinel SiteWatch is an advanced networking device that provides remote access to any Detcon gas detection system via Ethernet or cellular communication. The Ethernet version provides an IP addressed webpage that can be accessed via any web browser and both the Ethernet and cellular versions instantly provide automated emails for all alarm and fault conditions. The Sentinel SiteWatch connects to the Detcon X40, MCX-32 and Site Sentinel SmartWireless controllers through the RS-485 Modbus interface.
The system allows web browser access to real-time data from the gas detection system that includes: detector type, serial number, location/name, gas concentration, gas type and alarm status. In addition, when used with Detcon SmartWireless systems, the data includes battery life and link quality of all devices in the network.
Sentinel SiteWatch allows convenient and efficient access to remote system data by computer (desktop, portable, tablet) and cellular devices (iPhone, Droid, etc.) – virtually any device that has Ethernet, WiFi or cellular access.
Features
• Automated emails on alarm and fault conditions.
• Automated emails for gas detection alarm and fault conditions on both smart and cellular phones.
• Email message includes data file of last ten minutes of detector’s output prior to going into alarm/fault condition and coming out of alarm/fault condition.
• Web page provides sensor gas readings, identifies alarm and fault conditions, and provides remaining battery life and communication link quality for wireless systems.
Introduction to Part 2 loop signatures and process transfer functions
Fieldbus & Industrial Networking
The previous series of loop signature articles dealt with the basics of control loop optimisation, and concentrated on troubleshooting and ‘SWAG’ tuning of simple processes. In this new series, consideration will be given to dealing practically with more difficult issues like interactive processes, and with processes with much more complex dynamics.
Read more...Siemens sets new standards in drive technology
Fieldbus & Industrial Networking
Siemens is setting new standards in industrial drive technology with the launch of its new high-performance drive system, Sinamics S220. This offers a seamless and innovative drive system with comprehensive simulation and analysis capabilities and advanced connectivity features that enable full integration into digital work processes.
Read more...PC-based control in the plastics industry Beckhoff Automation
Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.
Read more...Loop Signature 31: Non-linearity in control loops (Part 2) Michael Brown Control Engineering
Fieldbus & Industrial Networking
This article is a continuation of Loop Signature 30 published in the last issue in this series, exploring reasons for non-linearities which may be encountered in feedback control loops
Read more...PC-based control optimises robotic parts handling on plastics machinery Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
NEO is a cartesian robot developed by INAUTOM Robótica in Portugal for parts removal on plastics machinery. Its aim is to increase system productivity. NAUTOM Robótica has entered into a strategic partnership with Bresimar Automação to increase the working speed of the cartesian robots using advanced control and motion solutions from Beckhoff. The result is a comprehensive, future-proof automation solution for its entire family of cartesian robots.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control technology in additive manufacturing Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
As an open control platform, PC-based control supports different engineering approaches, including low-code programming. The machine builder, Additive Industries uses this to create the code for the TwinCAT runtime of its 3D printers.
Read more...Integrating fire alarm systems into building management systems Beckhoff Automation
Fieldbus & Industrial Networking
Fire alarm systems work independently of the building automation system. Schrack Seconet has developed a flexible gateway using ultra-compact industrial PCs and TwinCAT from Beckhoff, which can be used to flexibly convert a customer-specific communication protocol to a wide range of transmission standards.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version