Electrical Power & Protection


Zest WEG Group’s protection systems

December 2015 Electrical Power & Protection

The continuous pursuit for improvement and cost reduction in industry has seen a rapid evolution in the development of electric motor control and protection systems. “To ensure that we meet all the needs of industry in this regard, as well as keeping abreast of the latest trends and developments, the Zest WEG Group has introduced its range of RW_E electronic motor protection overload relays, to complement the range of smart relays,” says switchgear manager Stephen Cook.

The relays are designed for increased reliability in terms of the protection of low-voltage three-phase motors in sinusoidal 50/60 Hz networks where reliability, low power dissipation and ease of maintenance are critical requirements. They have been developed in accordance with the IEC 60947-4-1 and UL 60947-4-1A (UL 508) international standards.

RW_E Electronic overload relays are highly reliable devices intended to protect motors, controllers and branch circuit conductors against phase failures and overloads that can result in overheating. These critical products play a vital role in overall system performance and efficiency and are designed to protect three-phase and single-phase AC motors.

The electronic overload relay has no power contacts and therefore cannot disconnect the motor by itself. Instead, motor overloads or phase failures increase the motor current, which in turn trips the mechanism and switches the auxiliary contacts. When wired properly in series with the coil of the contactor, these auxiliary contacts will de-energise the contactor in the event of an overload.

This means the contactor itself disconnects the power supply to the motor, halting its operation. Another handy feature is that, once tripped, the relay will only reset once the motor has cooled down, preventing costly damage. The relays are also temperature compensated, which means that the trip point is not affected by temperature and it performs consistently at the same current value.

In order to ensure rapid tripping in the case of phase loss, and thereby protecting the motor and avoiding costly repairs or additional maintenance, the WEG RW_E relays include phase failure sensitivity protection as a standard feature. They can be mounted directly onto the WEG CWB and CWM contactor ranges, which make for highly reliable and flexible motor starting units.

For more information contact Kirsten Larkan, Zest WEG Group, +27 (0)11 723 6000, [email protected], www.zest.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Navigating solar energy adoption
Electrical Power & Protection
Although South Africa’s enhanced solar tax rebate has ended, solar and energy storage solutions remain accessible and achievable. By taking a proactive and strategic approach, businesses can successfully lower their operational costs, mitigate power outages, and secure long-term energy independence.

Read more...
As wind energy gains momentum, lack of grid infrastructure remains a bottleneck
Electrical Power & Protection
Interest in wind energy has gained significant momentum in South Africa, opening up new opportunities for investment. However, lack of grid infrastructure could prove to be a stumbling block in unlocking this potential.

Read more...
Portable appliance tester
Vepac Electronics Electrical Power & Protection
The new appliance tester from Vepac is the ideal tool for testing the safety of electrical appliances in accordance with DGUV regulation 3 and BetrSichV. It enables the precise measurement of protective conductor or touch current using the equivalent leakage current method.

Read more...
Is sustainability enough any more?
Electrical Power & Protection
With the planet’s resources stretched to the brink and no signs of improvement, it is time we look beyond sustainability and explore regenerative thinking and design.

Read more...
A simple guide to understanding the importance of IP ratings
Electrical Power & Protection
When selecting electrical products for industrial, commercial or even domestic use, it is crucial to consider how well they can withstand environmental factors like dust and water. This is where ingress protection (IP) ratings come into play.

Read more...
A milestone in electrical safety
ABB South Africa Electrical Power & Protection
Celebrating a milestone in electrical safety, ABB proudly marks the 100-year anniversary of its revolutionary Miniature Circuit Breaker.

Read more...
The power of water
Editor's Choice Electrical Power & Protection
The Alpenglow Hy4 is the world’s first water-based hydrogen combustion engine, offering a convincing alternative to traditional battery-electric vehicles and established hydrogen fuel cell designs.

Read more...
Optimising purification for green hydrogen production
Parker Hannifin - Sales Company South Africa Editor's Choice Electrical Power & Protection
Parker Hannifin delivers advanced purification and thermal management components that enhance green hydrogen production.

Read more...
A new chapter in geothermal engineering
Editor's Choice Electrical Power & Protection
The town of Geretsried in southern Germany has become a focal point in the global shift toward renewable energy. While the world’s attention often turns to wind turbines and solar panels, a quieter but no less powerful force is at work deep beneath the surface, geothermal energy.

Read more...
Harnessing the ocean with wave energy
Editor's Choice Electrical Power & Protection
Wave energy is emerging as one of the most promising yet underutilised renewable sources. Tapping into the rhythmic, predictable power of ocean waves, this technology offers a clean, reliable alternative to fossil fuels and a valuable complement to wind and solar energy.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved