Enclosures, Cabling & Connectors


Test leads with adjustable guard

July 2015 Enclosures, Cabling & Connectors

Fluke’s new ultra-rugged TL 175 TwistGuard test leads feature a manually adjustable guard. The shroud of the extendable tip meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. Simply twisting the test lead cuts the exposed probe tip length from 19 to 4 mm. Extra-heavy duty strain relief on both probe-end and plug-end has been tested beyond 30 000 bends without failure.

WearGuard double insulated silicone leads ensure added safety as each lead has two silicone insulation layers: red or black on the outside and white inside. Any white showing through warns of nicks or scuffs in the insulation. The double insulation also means they can withstand high temperatures and remain flexible in cold temperatures. The leads are CAT II 1000 V (extended) or CAT III 1000 V and CAT IV 600 V safety rated (retracted).

Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs.

For more information contact Comtest Group, +27 (0)10 595 1821, [email protected], www.comtest.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Innovative cable entry for maximum flexibility and efficiency
Enclosures, Cabling & Connectors
icotek is setting new standards in terms of flexibility, efficiency and space-saving with a new series of cable glands.

Read more...
Safety-critical fibre optic systems in mining
Omniflex Remote Monitoring Specialists Enclosures, Cabling & Connectors
Omniflex highlights the importance of fibre optic technology in in enabling systems in the mining industry to transmit shutdown commands reliably over tens of kilometres and verify that they have been executed.

Read more...
Compact integration of 3A and 4A connectors
Enclosures, Cabling & Connectors
With the new AT-HA grommet, icotek is expanding its innovative IMAS-CONNECT adapter system with a forward-looking solution for industrial use.

Read more...
How to use a voltage tester
Comtest Electrical Power & Protection
Voltage testers are valuable tools for professionals who work with electrical systems.This application note will guide you on how to use a voltage tester effectively, and which Fluke voltage testers can assist in a variety of settings.

Read more...
Space-saving I/O module for control cabinets
ifm - South Africa Enclosures, Cabling & Connectors
The IO-Link I/O module from ifm simplifies integration of sensors and actuators with conventional wiring in the control cabinet as well as in field applications with low IP protection class requirements.

Read more...
The future of industrial connectivity
LAPP Southern Africa Enclosures, Cabling & Connectors
Designed to meet the demands of modern industry, the EPIC DATA RJ45 connector from LAPP delivers a combination of durability, performance and versatility suited to demanding industrial environments.

Read more...
Hybrid connectors for distributed automation
Beckhoff Automation Enclosures, Cabling & Connectors
Beckhoff’s ECP and ENP connector series combine power with signal and data communication by means of One Cable Automation (OCA) and thus significantly reduce cabling work.

Read more...
Common battery tester errors and what they mean
Comtest Electrical Power & Protection
Battery testers help quickly assess battery health, diagnose issues, and determine whether a battery needs a charge or replacement. This guide covers some of the most common battery tester errors, what they mean, and what can cause them.

Read more...
Multifunction installation tester speeds up testing by 30%
Comtest Electrical Power & Protection
Comtest has launched the new Fluke 1670 Series Multifunction Installation Tester, which can cut the amount of time electricians and maintenance technicians spend producing reports by up to 50%,

Read more...
Power distribution reinvented
Rittal Enclosures, Cabling & Connectors
Rittal has developed the RiLineX, a modular busbar system that redefines how power is distributed inside electrical enclosures.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved