There are industrial environments where calibrations should not only be made accurately and efficiently, but also safely. When safety becomes a top priority issue in calibration, intrinsically safe calibrators are required.
Intrinsic safety (IS) is a protection technique for safe operation of electronic equipment in explosive environments. The idea behind intrinsic safety is to be assured that the available electrical and thermal energy in the system is always low enough that ignition of the hazardous atmosphere cannot occur.
Intrinsically safe calibrators
An intrinsically safe calibrator is designed to be incapable of causing ignition in the surrounding environment with flammable materials, such as gases, mists, vapours or combustible dust. Intrinsically safe calibrators are also often referred to being ‘Ex calibrators’ or ‘calibrators for Ex areas’.
Many industries require intrinsically safe calibration equipment. Intrinsically safe calibrators are designed for potentially explosive environments, such as oil refineries, rigs and processing plants, gas pipelines and distribution centres, petrochemical and chemical plants, as well as pharmaceutical plants. Basically, any potentially explosive industrial environment can benefit from using intrinsically safe calibrators.
Benefits of using intrinsically safe calibrators
Safest possible technique: intrinsically safe calibrators are safe for employees, as they can be used in environments where the risk of an explosion exists. In addition, intrinsically safe calibrators are the only technique permitted for Zone 0 environments (explosive gas and air mixture is continuously present or present for a long time).
Performance and functionality: multifunctional intrinsically safe calibrators provide the functionality and performance of regular industrial calibration devices, but in a safe way. They can be used for calibration of pressure, temperature and electrical signals. A documenting intrinsically safe calibrator, such as the Beamex MC5-IS, provides additional efficiency improvements with its seamless communication with calibration software. This eliminates the need of manual recording of calibration data and improves the quality and productivity of the entire calibration process.
Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.
Read more...Installation safety tester Vepac Electronics
Maintenance, Test & Measurement, Calibration
A combination measuring device for testing electrical installations, offering safety tests including RCD, voltage, loop, low-resistance, earth resistance and insulation checks via a 3,5-inch TFT colour display.
Read more...Vibration sensor with CANopen interface for mobile machines ifm - South Africa
Maintenance, Test & Measurement, Calibration
: ifm’s 3-axis VMB301 condition monitoring sensor integrates into the vehicle network via CANopen, delivering real-time bearing, vibration and temperature data to help mobile machines avoid costly damage and downtime.
Read more...Linear regulated 2-channel laboratory power supply Vepac Electronics
Maintenance, Test & Measurement, Calibration
Vepac Electronics offers a dual-channel laboratory power supply built for safe, precise testing in laboratories and workshops.
Read more...When oil gets old Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck explains how oxidation breaks down lubricating oils over time, and how routine oil analysis can catch the warning signs before equipment failure.
Read more...SEW-EURODRIVE brings intelligent energy optimisation to Electra Mining SEW-EURODRIVE
Maintenance, Test & Measurement, Calibration
At Electra Mining Africa 2026, SEW-EURODRIVE will showcase its DriveRadar IoT platform for predictive maintenance and real-time energy optimisation, alongside plant energy surveys and an 1850 kW medium voltage motor display.
Read more...Thermal imaging camera with high thermal resolution Vepac Electronics
Temperature Measurement Maintenance, Test & Measurement, Calibration
Vepac Electronics introduces a compact thermal imaging camera that helps technicians spot temperature problems before they become costly failures.
Read more...What your lubricant really costs
Maintenance, Test & Measurement, Calibration
The purchase price of an industrial lubricant is only a fraction of what lubrication truly costs a business. Lubrication Engineers South Africa explains how shifting from unit price to total cost of ownership changes the equation significantly.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex explains how integrating remote monitoring and cloud-based platforms into cathodic and anodic protection systems is helping process plant operators stay ahead of corrosion and make smarter maintenance decisions.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version