Dehn Protection South Africa introduces a space-saving type 2 surge protection

September 2014 Electrical Power & Protection

The DEHNcord type 2 surge arrester, two-pole or single-pole, can be fitted in systems such as the terminal compartments of end loads, cable ducts or flush-mounted systems to protect from surges caused by lightning interference. This device can be installed in flush type boxes, cable ducts and flush mounted systems and reliably protects outdoor LED lights from surges.

Compact in design, DEHNcord can be installed wherever the performance of a standard type 3 surge protective device for terminal equipment reaches its limits. DEHNcord ensures surge protection wherever space is restricted and can also be used at the transition from lightning protection zone (LPZ) 0B to 1 or higher.

The arrester meets the requirements of EN / IEC 61643-11. It has a short-circuit current withstand capability of 25 kA in case of mains-side protection and a total discharge current of 20 kA (8/20 µs).

Despite the compact design, the device houses a visual state/fault indication. When space is restricted in the cable duct, DEHNcord is the ideal solution due to its flexible terminals.

For more information contact Alexis Barwise, Dehn Protection South Africa, +27 (0)11 704 1487, [email protected], www.dehn-africa.com

Further reading:

Overcoming the bottling industry’s fragmented visibility
Schneider Electric South Africa IT in Manufacturing Electrical Power & Protection
Beverage bottling facilities are among manufacturing’s most energy-intensive environments, yet many still operate without granular insight into where that energy goes. Rezolia Muller-Potluri of Schneider Electric explains how tiered metering architecture and advanced

Read more...

---

Schneider Electric introduces next-generation BlokSeT switchboard
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its next-generation BlokSeT low-voltage switchboard in West Africa, offering high reliability, predictive maintenance capability and digital integration for critical infrastructure and industrial applications.

Read more...

---

Powering South Africa’s renewable energy expansion
Electrical Power & Protection
ACTOM Distribution Transformers, the sole NECRT contract holder for Eskom, is powering South Africa’s renewable energy expansion through robust neutral earthing transformer solutions deployed across solar and wind projects in southern Africa.

Read more...

---

You can’t digitise a blackout
Schneider Electric South Africa Electrical Power & Protection
Across East Africa, smart meters and AI promise cleaner, more reliable power, but digital tools cannot optimise a grid too weak to carry the load. Schneider Electric’s Symphrose Ochieng sets out why operators should strengthen physical infrastructure first, then add digital capability in phases.

Read more...

---

Battery energy storage is key to powering South Africa’s manufacturing sector
Electrical Power & Protection
South Africa’s shift to renewables is creating a significant opportunity in battery energy storage, but local manufacturers face an uphill battle against cheap imports and stop-start demand. Richard van Moltke of ACTOM Static Power examines what it will take to build a sustainable local battery storage industry.

Read more...

---

Decarbonisation is reshaping mining strategy in Africa
Schneider Electric South Africa IT in Manufacturing Electrical Power & Protection
Mining companies across Africa are embedding decarbonisation into operational strategy, driven by investor, regulatory and customer pressure to reduce emissions while improving resilience.

Read more...

---

How to tell whether your mini-substation is new or refurbished
Electrical Power & Protection
Cosmetically refurbished mini-substations are being misrepresented as new equipment and sold back into the market, posing serious reliability and safety risks for mining, industrial and commercial operations. Trafo Power Solutions explains what to look for and what questions to ask before purchasing.

Read more...

---

Optimising energy reliability for African manufacturing
Electrical Power & Protection IT in Manufacturing
Unreliable power can cost African manufacturers as much as 31% in sales. Behind-the-meter power offers manufacturers in sub-Saharan Africa control, visibility and resilience in their energy provisioning.

Read more...

---

Electrical solutions for FMCG manufacturing giant
Electrical Power & Protection
An electrical upgrade at a leading fast-moving consumer goods facility demonstrates how ACTOM Kenya turned a fragile, reactive power infrastructure into a resilient, data-driven backbone for production. The project is also a case study in bridging legacy equipment with modern automation without disrupting operations.

Read more...

---

Power and energy meter with Modbus RTU interface
Vepac Electronics Electrical Power & Protection
The eCap universal power and net quality meter measures voltages, currents, power, power factor, energy, frequency and total harmonic distortion, with fully galvanically isolated transmission via an integrated Modbus RTU/RS485 interface.

Read more...

---